Jump to: navigation, search

Difference between revisions of "LDR / HDR - Workflow case B"

(Example 2)
(Settings)
Line 72: Line 72:
 
To avoid this, we increase the Multiband blending level going from -2 to 0.
 
To avoid this, we increase the Multiband blending level going from -2 to 0.
  
On the left, the result using the '''Exposure Fusion''' preset (by default). At right, the result using the Multiband blending level increased.
+
On the top, the result using the '''Exposure Fusion''' preset (by default). At the bottom, the result using the Multiband blending level increased.
  
 
{|
 
{|
 
|-
 
|-
| [[Image:Autopano250 HDR-casB-ex2-render1.jpg|thumb|400px|Exposure Fusion preset]]
+
| [[Image:Autopano260 HDR-casB-ex2-render1.jpg|thumb|600px|Exposure Fusion preset]]
| [[Image:Autopano250 HDR-casB-ex2-render2.jpg|thumb|400px|Multiband blending level increased]]
+
|-
 +
| [[Image:Autopano260 HDR-casB-ex2-render2.jpg|thumb|600px|Multiband blending level increased]]
 
|}
 
|}
  

Revision as of 11:27, 14 December 2011


From LDR input with bracketing to LDR output

This is the case that photographers called HDR: several exposures in input and LDR panorama in output. It's classic for virtual tours but also for landscape photography, etc..


Workflow

The idea to get through such panorama is first to group images by layers, then to use the color correction by layer (ie by exposure level) to adjust the exposure between the images within the same layer.
The anti-ghost is also active in each layer. Then, the fusion will preserve the best exposed areas from each layer.


Example 1

Source images

In this first example, we use the test images from the Freeman's book.

Autopano250 HDR-casB-ex1-sources.jpg

Settings

To get a preview of the fusion in the editor, you only need to enable it on the fusion tool window.

The default settings tend to keep overall average brightness
Playing on the settings allows for example to target a higher brightness

In the Render settings, use the Exposure Fusion preset.
You should know that if the fusion has not been enabled in the editor but that the Exposure Fusion preset is used on the rendering, the default settings of the fusion are used (targeting an average exposure).

Autopano260 HDR-casB-ex1-parameters-en.jpg

Render

To illustrate the final result we left the default settings even if it was not necessarily the most esthetical choice. We just note that the final goal is reached:
For the brightest areas of the scene (the lights!) the information used comes from the under-exposed brackets; and for the darkest areas, the information has been taken in the highest exposures.

Autopano260 HDR-casB-ex1-render.jpg

We can also note that in the fusion's case, it was useless to shoot too many brackets. Very underexposed images did not contribute to the final result. This is not necessarily applicable in the case of an HDR output where the aim is not to choose the pixels from the best exposures but to combine information from different exposures (this is only possible if the dynamic range of the rendering format is really HDR).

Example 2

Source images

This example is similar to the previous case, but more like the bracketed shootings made ​​by the majority of users.
That means less exposure levels (3 levels here) and an automatic reference exposure (brackets levels are not identical).

Autopano250 HDR-casB-ex2-sources.jpg

Settings

The settings are almost similar to the previous case too. But as the brackets don't get the same reference exposure levels, the result of the blending can be locally unbalanced.
To avoid this, we increase the Multiband blending level going from -2 to 0.

On the top, the result using the Exposure Fusion preset (by default). At the bottom, the result using the Multiband blending level increased.

Exposure Fusion preset
Multiband blending level increased

Generally, increasing the Multiband blending level allows multiband rebalance the final rendering.
However, if the level is too high, the final result can be a bit "flattened". So it needs to increase this level only if necessary.

Example 3

Source images

Some scenes don't need to be fully bracketed. In this example, the ambient light is fairly balanced except for the shot of the bay window.
We thus only brackets the shot of the bay window.

Autopano250 HDR-casB-ex3-sources.jpg

Settings

We must check that both bracketed pictures have been added in different layers to avoid the LDR color correction to deal on these images (color correction must be set by layers).

Note : if the main layer is well balanced, it is not necessary to enable the color correction.

Autopano250 HDR-casB-ex3-groupes-en.jpg

You must use the Exposure Fusion preset. The fusion will be apply only where different exposure images are located.
The fusion is local, the hue resulting from the fusion will not necessarily be well balanced with the hue of the main layer.
To reduce this phenomenon, it is possible to increase the spreading made by Multiband blending.
Here, we set the level at -4.

Autopano250 HDR-casB-ex3-parameters-en.jpg

Render

The fusion has preserved more matter in over-exposed area of the bay window.

Result using the same exposure images
Result using the bracketed images





Technical Support / Autopano Pro 2.5 Documentation / Autopano Giga 2.5 Documentation