fsimao222 wrote: JPG quality 12
fsimao222 wrote:I should be doing something wrong.
fsimao222 wrote:My panoramas size are: 3840x1920px at 300pixels/inch
mediavets wrote:6k x 3k would normally be considered the minimum for reasonable detail I believe, unless you are only ever going to display the pano is a small window on web page.
klausesser wrote:fsimao222 wrote: JPG quality 12
Much too high. Use 8. I did it here: http://www.360impressions.de/Lichtturm (700MPx per pano).fsimao222 wrote:I should be doing something wrong.
Yes: too much data-size due to JPG12.fsimao222 wrote:My panoramas size are: 3840x1920px at 300pixels/inch
Very small pixel-size - minimizes view-quality. 300dpi is ONLY needed for offset-printig in magazines and so.
Set your APG rendering to 72dpi (default) and set JPG to max. 8 in PTP.
if im exporting in autopano should i still export at max quality (12) then set it to 8 in panotour or can i use 8 for both?
or will that reduce quality further since panotour would export a lower quality pano at at quality of 8?