panorama of drawing on antique vessel   [RESOLU] - View the solution

Partagez vos trucs et astuces dans ce forum ou obtenez de l'aide sur l'utilisation d'Autopano Pro / Giga.
Attention, pas de post sur les bugs ici ...
no avatar
alexF-64
New member
 
Topic author
Posts: 4
Likes: 5 posts
Liked in: 0 post
Joined: Mon Oct 05, 2015 3:45 pm
Info

panorama of drawing on antique vessel  [RESOLU]

by alexF-64 » Fri Feb 02, 2018 9:29 pm

hello everybody,
My question is about stitching panorama of drawing on antique vessel. I have an experience with 360°exterior/interior VR tours.
No 1 - how to shoot, how many overlaps, any advice about lenses etc.
No 2 - how to proceed with Autopano Pro, my version is 4.2.
Thank you very much, every idea will be appreciated.

no avatar
Panoram1x
Member
 
Posts: 236
Likes: 1 post
Liked in: 41 posts
Joined: Sun Jun 06, 2010 9:59 pm
Location: Barcelona (Catalunya)
Info

Re: panorama of drawing on antique vessel

by Panoram1x » Mon Feb 05, 2018 1:14 pm

It seems that your problem is similar to this
viewtopic.php?f=2&t=37653
viewtopic.php?f=2&t=31717#p182669

You can try these settings
viewtopic.php?f=2&t=31164#p181055

As for the overlap, the usual, between 20 and 30% should be adequate.

alexF-64 likes this post.

no avatar
alexF-64
New member
 
Topic author
Posts: 4
Likes: 5 posts
Liked in: 0 post
Joined: Mon Oct 05, 2015 3:45 pm
Info

Re: panorama of drawing on antique vessel

by alexF-64 » Mon Feb 05, 2018 9:55 pm

Hi Panoram1x,
Thank you very much! I will try it. I used PtGui, better results but not enough. An example is attached below. A drawing is curved horisontaly and a little vertically. :)))
Attachments
sample.jpg
sample.jpg (45.79 KiB) Viewed 3916 times

no avatar
Panoram1x
Member
 
Posts: 236
Likes: 1 post
Liked in: 41 posts
Joined: Sun Jun 06, 2010 9:59 pm
Location: Barcelona (Catalunya)
Info

Re: panorama of drawing on antique vessel

by Panoram1x » Tue Feb 06, 2018 1:26 pm

You will let us know how this has worked for you.
... remember that the camera can only be moved up / down and right / left, but can not be tilted and must maintain a constant distance from the drawing with the optical axis perpendicular to it.
Experimentation is the funniest way to learn, to ask the fastest
jordi.panoram1x[at]gmail[dot]com

alexF-64 likes this post.

User avatar
olivierbo
Kolor Team
 
Posts: 2225
Likes: 1 post
Liked in: 133 posts
Joined: Thu Nov 06, 2014 11:44 am
Info

Re: panorama of drawing on antique vessel

by olivierbo » Tue Feb 06, 2018 2:51 pm

Hello,

Can you give more details about the hardware used, the way you shoot, etc?
What camera/lens couple
Aperture
Did you shoot using a kind of grid (rows and columns)?
Did you shoot from a single point or multiple points?
How many pictures?

Thanks in advance.

Best,
Olivier

alexF-64 likes this post.

no avatar
alexF-64
New member
 
Topic author
Posts: 4
Likes: 5 posts
Liked in: 0 post
Joined: Mon Oct 05, 2015 3:45 pm
Info

Re: panorama of drawing on antique vessel

by alexF-64 » Thu Feb 08, 2018 8:19 pm

Hello,
Many thanks to all that took part of my post. A scene on the vessel contains 4 figures/persons about 5 cm tall. The whole scene is about 8 cm long, curved around the vessel. My camera Canon 5d mk II with Canon 100 mm Macro lens is positioned in front of scene a little bit down to the axis of vertical curve. I shoot vertical several images of each figure/person with different focus and stitch them to obtain multifocus image. Finally I have four multifocus images to stitch in panorama. The camera is immobile and I turn the vessel to have each part in front of the lens. I obtained an acceptable result with Image Composite Editor of Microsoft. Some fragments need to be adjusted by free transform in Photoshop.
Thank you very much to participate in this problem. Every idea will be appreciated! :-)

no avatar
Destiny
Moderator
 
Posts: 7883
Likes: 6 posts
Liked in: 228 posts
Joined: Mon Apr 26, 2010 11:55 pm
Location: Australia
Info

Re: panorama of drawing on antique vessel

by Destiny » Thu Feb 08, 2018 10:47 pm

Hi... I am still lost in what you are trying to achieve.

Are you after a high rez extracted image or a multi row 360 like this...

http://www.destinyvirtualtours.com/Obje ... eVase.html

Destiny...

alexF-64 likes this post.

no avatar
Panoram1x
Member
 
Posts: 236
Likes: 1 post
Liked in: 41 posts
Joined: Sun Jun 06, 2010 9:59 pm
Location: Barcelona (Catalunya)
Info

Re: panorama of drawing on antique vessel

by Panoram1x » Fri Feb 09, 2018 5:03 pm

I think before I had not understood what you want to do
If what is needed is to obtain a development (flat image) of the outside of the vessel, it is possible that your case is similar to this other viewtopic.php?f=7&t=33537
If so, you can try the procedure that I've used to obtain the development of the bark of the tree [Improving my vertical misalignment :) ]
In your case it is not a cylindrical object and I do not know if the conical vessel will create insurmountable problems.
But if you shoot the photos from further away and use a long focal lens, the flattening effect of the telephoto lens will minimize the problems of misalignment between the upper and lower part of the vessel (I hope)
Experimentation is the funniest way to learn, to ask the fastest
jordi.panoram1x[at]gmail[dot]com

alexF-64 likes this post.

no avatar
alexF-64
New member
 
Topic author
Posts: 4
Likes: 5 posts
Liked in: 0 post
Joined: Mon Oct 05, 2015 3:45 pm
Info

Re: panorama of drawing on antique vessel

by alexF-64 » Tue Feb 13, 2018 7:56 pm

Yes, thank you very much Panoram1x. "the development of the bark of the tree" is my task. I made several series with 50 mm focal lens, 70 mm focal lens, etc. The best results, as you mentioned, are with 100 mm macro.


Who is online

Users browsing this forum: No registered users and 2 guests