Hope you could assist. We have started doing a few more test and we have run into a problem on our side.
We just recorded a 2.3min long clip from a helmet rig and used 6 GoPro Hero 3+'s all recording at 1440, 48 frames. When we tried to import the 6 videos into AVP2 it gives us an error saying that the frame rate must all be the same. We have checked and double checked the videos we are uploading by inspecting in Quicktime and can confirm they are all the same frame rate.
We then checked to see which video\s were giving the issue and we were able to narrow it down to 1 video which was the problematic one. We then inspected this one against the others and all was the same (Same length, same frame rate, etc)
Is there some trick or something we could do?
note: I tried the latest beta of AVP2 and still same issue. Any help would be greatly appreciated.
Have reshot in 960 and its working now. We will later again try at 1440 and see if it still gives an error. If there is anything "known" as such it would be good to know I guess but if its a "freak" thing then I guess we can figure out as we go.
In terms of "safest" options, what would you recommend we shoot in especially if its footage we cannot retake? Thanks.