Image-stitching and virtual tour solutions My account Updates
It is currently Sat Sep 20, 2014 12:59 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Dec 20, 2010 3:52 pm 
Offline
Member

Joined: Tue Feb 21, 2006 5:32 pm
Posts: 1285
Location: Connecticut, USA
APP is now detecting panos better than ever!

But I have a pano that was badly stitched--it was a 360 that had multiple exposures per position but the circle wasn't closed. I added links to close the circle, but one link goes from the leftmost to the rightmost set of images (the red box is in the middle of the screen and has a high RMS). The main screen shows it to be only about 208 x 69, where it should be 360x111 (or 113....) degrees.

The focal length calculated is 26.28, it should be about 12.

Tried to change the FOV to 90 (to give FL of 12) but couldn't do it for all images. I can change it for each image, but that's painful, and what's worse, when the program accepts one FOV change, it redisplays the list of images starting with 1 at the top, so I have to scroll down to image 50.

We need either a button to say "this is a 360 degree pano" or the ability to change all the focal lengths with a minimal effort.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 20, 2011 12:02 pm 
Offline
Member
User avatar

Joined: Tue Jun 09, 2009 1:01 pm
Posts: 3323
Location: Salzburg
hankkarl wrote:
APP is now detecting panos better than ever!

But I have a pano that was badly stitched--it was a 360 that had multiple exposures per position but the circle wasn't closed. I added links to close the circle, but one link goes from the leftmost to the rightmost set of images (the red box is in the middle of the screen and has a high RMS). The main screen shows it to be only about 208 x 69, where it should be 360x111 (or 113....) degrees.

The focal length calculated is 26.28, it should be about 12.

Tried to change the FOV to 90 (to give FL of 12) but couldn't do it for all images. I can change it for each image, but that's painful, and what's worse, when the program accepts one FOV change, it redisplays the list of images starting with 1 at the top, so I have to scroll down to image 50.

We need either a button to say "this is a 360 degree pano" or the ability to change all the focal lengths with a minimal effort.

a workaround could be using external tool to batch change the focal lengths:
there should also be some free tools for that, I found in my 2seconds google search just a commercial one:
e.g. http://www.opanda.com/en/pe/index.html

about unclosed 360 circle....
idea: save the project file and than edit with an texteditor the .pano file. Perhaps you can here change some values so saying the circle is closed...
(I think the image than should be streched...)

Liebe Gruesse,
Georg

_________________
pages: gigapixel.at - jedermann.at - My Equipment


Last edited by gkaefer on Thu Jan 20, 2011 12:55 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 20, 2011 12:38 pm 
Offline
Member

Joined: Mon May 22, 2006 12:18 am
Posts: 7734
Location: Duesseldorf, Germany
hankkarl wrote:
We need either a button to say "this is a 360 degree pano" or the ability to change all the focal lengths with a minimal effort.

There IS a button to say "this is a 360° pano" - use the settings in prefs. There also is a box to set the focal length - that is in prefs also.

Or did i misunderstand?

best, Klaus





_________________
Simplicity is the keynote of all true elegance. Coco Chanel


Last edited by klausesser on Thu Jan 20, 2011 12:41 pm, edited 1 time in total.

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group