hankkarl wrote:APP is now detecting panos better than ever!
But I have a pano that was badly stitched--it was a 360 that had multiple exposures per position but the circle wasn't closed. I added links to close the circle, but one link goes from the leftmost to the rightmost set of images (the red box is in the middle of the screen and has a high RMS). The main screen shows it to be only about 208 x 69, where it should be 360x111 (or 113....) degrees.
The focal length calculated is 26.28, it should be about 12.
Tried to change the FOV to 90 (to give FL of 12) but couldn't do it for all images. I can change it for each image, but that's painful, and what's worse, when the program accepts one FOV change, it redisplays the list of images starting with 1 at the top, so I have to scroll down to image 50.
We need either a button to say "this is a 360 degree pano" or the ability to change all the focal lengths with a minimal effort.
hankkarl wrote:We need either a button to say "this is a 360 degree pano" or the ability to change all the focal lengths with a minimal effort.
Users browsing this forum: No registered users and 1 guest