bluetooth connection problem  

English support for Panogear kit
no avatar
mallik
New member
 
Posts: 9
Joined: Tue Feb 26, 2013 3:41 pm

bluetooth connection problem

by mallik » Fri Mar 15, 2013 7:39 pm

Hi I'm experiencing problem with the blue tooth connection transmitter/receiver. I have paired the panogear with my laptop to work with papywizard, it connected successfully n I tested it completely everything worked fine pan/tilt shutter, trigger, bracketing etc. Today I wanted to shoot a test panorama, papywizard is crashing when I click the connect, I have tried repairing but not succeded.please help to fix it.

Windows7 x64
I5 processor 2.4ghz
4gb ram

Thanks

no avatar
mediavets
Moderator
 
Posts: 14293
Joined: Wed Nov 14, 2007 2:12 pm
Location: Isleham, Cambridgeshire, UK.

by mediavets » Fri Mar 15, 2013 8:50 pm

Try a serial connection (via Bluetooth) instead.

Look at your Windows Bluetooth config. to determine the virtual COM port assigned.

then configure a serial connection in papywizard. Serial port values may be enmeterd as '0', '1', '2', '3' etc. or 'COM1', 'COM2', 'COM3' etc.

Papywizard enumerates serial ports from 0 (zero) so you may enter '1' or 'COM2', '2' or 'COM3', and so on.
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.

no avatar
mallik
New member
 
Posts: 9
Joined: Tue Feb 26, 2013 3:41 pm

by mallik » Sun Mar 17, 2013 9:24 am

mediavets thanks its working again.


Return to Panogear

Who is online

Users browsing this forum: No registered users and 2 guests