Sooooooooooooo.... ich habe mir auf Basis deines ersten Presets eines gemacht mit Hochformat! 360 / 180 grad hat perfekt geklappt aber wie gesagt ich hab versatz im bild. Also diese Paralaxfehler . Angenommen ich würde mir ein 8mm Fischeye Objektiv kaufen, wà¤ren die Fehler dann weg? Was ist eigentlich mit Autofokus? Vorher fokussieren und dann auf Manuel schalten, richtig? Puhh Fragen über fragen. Anfà¤nger halt
P.S: ich spende gerne!
You can shoot 360x180 panoramas with any camera and lens.
The higher the resolution of the senor and the longer the focal length then the higher the resolution of the stitched panorama.
You need to decide what final pano resolution will meet your requirements and then find a combination of lens and camera body that will produce that when the pano is stitched.
The longer the focal length the more images will be required to cover 360x180 FOV, and the longer the shoot will take to complete, this can make shoots more challenging if there is any movement in the scene or lighting conditions are changing quickly. It also makes stiching and post-processing the pano much more challenging. Longer focal length also mean shallower depths of field.
Using fisheye lenses significantly reduces the number of images required to cover a 360x180 pano FOV. However, unless shooting from a pole, a motorized pano head offers little, if any, advantage if shooting with a fisheye lens. A manual pano head will typically be as quick and convenient to use and will have a smaller nadir footprint.
When shooting 360x180 panos - or partial panos with a pano FOV of less than 360x180 - it's essential to position your camera/lens at the NPP unless there's nothing in the scene closer than about 100 metres.
The Panogear/Merlin mount is quite limited in the adjustments that are possible to enable you to position a camera/lens at the NPP. There is no built-in adjustmenet on the horizontal axis of rotation and the height of the vertical arm limits positioning on the pitch axis of rotation.
If the dimension between the base of the camera body and the centre of the lens mount is more than about 40mm (or the diameter of the lens barrel is more than about 80mm) then you will not be able to mount the camera in portrait orientation at the NPP regadless of the focal and physical length of the lens without modifying the dovetail clamp and /or the rail.