Issues with Canon Ds1 Mk2  

English support for Panogear kit
no avatar
ISpyI
New member
 
Posts: 1
Joined: Tue Jan 31, 2012 5:56 pm

Issues with Canon Ds1 Mk2

by ISpyI » Tue Jan 31, 2012 6:29 pm

Hello,

I have an issue with the connection of the shutter cable to the Canon Ds1 Mk2 camera, when connected, the camera losees all functions, it cannot autofocus, cannot meter light and adjust shutter speed/apreture and all buttons are inactive.
The camera actually takes the pictures when commanded by the head/papywizard but if focus or light change it cannot compensate for it is "locked" in the last settings before the connection was made.
If I remove the jack from the panogear head or the RS 80N3 plug from the camera it goes back to normal.
Also when plugged in, the little 'in focus' indicator inside the viewfinder turns on even if the image is out of focus.

Thank you for your help.

User avatar
fma38
Member
 
Posts: 5826
Joined: Wed Dec 07, 2005 6:21 pm
Location: Grenoble, France

by fma38 » Wed Feb 08, 2012 1:07 pm

Did you check your cable? No short circuit?
Frédéric

Canon 20D + 17-40/f4 L USM + 70-200/f4 L USM + 50/f1.4 USM
Merlin/Orion panohead + Papywizard on Nokia N800 and HP TC-1100

User avatar
claudevh
Member
 
Posts: 1341
Joined: Sun Nov 25, 2007 11:12 pm
Location: Mont-Saint-André (Belgium)

by claudevh » Wed Feb 08, 2012 2:32 pm

Probably, the "Ground" and the "Tip" are in contact somewhere.
For Canon's this cause a continuous contact to the Shutter and then all normal operations of your camera are blocked.

See the next diagram:


:cool: Claude :cool:
Merlin + Papywizard on Windows 7 & Nokia 770 § N810 & Acer (Netbook) + PanoramaApp Androïd + Deltawave PapyMerlin BT + Autopano
Spherical Pano (180 x 360) with Canon 40D + Canon EF-S 10-22mm f/3.5-4.5 Zoom & Pôle Pano with Canon 5D MK2 and shaved Tokina 10-17 3.5-4.5 AF DX Fisheye
Gigapixel photography with Nikon D200 + Sigma 70-200 F 2.8 EX DG APO HSM


Return to Panogear

Who is online

Users browsing this forum: No registered users and 2 guests