papywizard and connecting from mac OSX  

English support for Panogear kit
no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

papywizard and connecting from mac OSX

by mawa_73527 » Mon Jan 17, 2011 2:15 pm

Hi

just got the panogear ...
installed papywizard 2.1x mac OS the latest. When I launch the software it will abort and give me long lines on why it cannot do so (unknown typestr)!

I have a connection to the BT module but it gets constantly lost from my mac book. the light in the BT controller is blinking but oce the connection is lost I do seem to be able to reconnect.
When I try to connect to the BT module I get the message that a command cannot be sent axis-1

User avatar
vincen
Kolor Certified Trainer
 
Posts: 963
Likes: 23 posts
Liked in: 4 posts
Joined: Fri Mar 13, 2009 11:30 am
Location: Grenoble, France
Info

by vincen » Mon Jan 17, 2011 2:33 pm

First of all use Papywizard 2.0 and not 2.1 (that doesn't work for now on Mac OSX).
The LED on BT Controller will become solid only when Papywizard will be connected onto it :)
Did you follow guidelines in updated manual ? http://www.kolor.com/buydev/media/pages/products/panohead/panogear-manuel-fr.pdf
Blog: http://www.skivr.com
Nodal Ninja 4 R-D16 on Benro Tripod + Ultimate R1 on Nodal Ninja P2 + Nikon D800 + Nikkor 10.5 + Nikkor 14/24 f/2.8 +Pentax 645D

no avatar
marco.lanciani
Member
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Thu Feb 23, 2006 2:55 pm
Location: Roma, Italy
Info

by marco.lanciani » Mon Jan 17, 2011 3:48 pm

Hi Matthias,

are you using the internal bluetooth of your Mac? If so, I can't connect either to papywizard through my Mac alone.
I now use an external USB Bluetooth device on my Mac and have no problem.

Hope this helps,
Marco

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Mon Jan 17, 2011 5:04 pm

ok thanks folks got the connection all going now need to learn the software. Are there any presets that can be downloaded from the web?

User avatar
gkaefer
Member
 
Posts: 3550
Likes: 0 post
Liked in: 15 posts
Joined: Tue Jun 09, 2009 1:01 pm
Location: Salzburg
Info

by gkaefer » Mon Jan 17, 2011 5:24 pm

see the preset generators in following link:
http://www.papywizard.org/wiki/WikiStart#Tools

can be saved as local html file on your computer with these generators you can create the xml presets that can be loaded to papywizard.......
Georg
Last edited by gkaefer on Mon Jan 17, 2011 5:27 pm, edited 1 time in total.

no avatar
mediavets
Moderator
 
Posts: 16414
Likes: 2 posts
Liked in: 130 posts
Joined: Wed Nov 14, 2007 2:12 pm
Location: Isleham, Cambridgeshire, UK.
Info

by mediavets » Mon Jan 17, 2011 6:04 pm

mawa_73527 wrote:ok thanks folks got the connection all going now need to learn the software. Are there any presets that can be downloaded from the web?

Papywizard offers two modes of shooting - Mosiac and Preset.

Preset is intended for shooting spherical (360x180) panos where it is desirable to reduce the number of images in rows as you approach the zenith or nadir. The preset node utilises XML format files that define an arbitrary series of shooting co-ordinates. Ask here on the forum to see whether somone has aleady made suitable preset for your camera/lens combination; alternatively you can create you own custom preset files very easily:
http://www.papywizard.org/wiki/UserGuideSvn#Presetmode

For all other, partial, panos (with less than 360x180 pano FOV) you'll probably be best off using the Mosiac mode, which shoots a regular matrix/grid of images.

You can define the matrix by setting the opposing corner co-ordinates, by setting the desired pano FOV, or by setting the number of rows and columns.

In the latter two cases the shooting positions will be computed 'around' the user-defined reference point which be in the centre of the matrix.
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Mon Jan 17, 2011 6:09 pm

ok thanks some how I would like to get the shutter of my camera to release ... this did not work so far!
Last edited by mawa_73527 on Mon Jan 17, 2011 6:48 pm, edited 1 time in total.

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Mon Jan 17, 2011 7:29 pm

OK I get the gear to rotate and go up and down with the the software. I define a start point and an endpoint. I get the shots calculated. I got to shoot and press start and I get the message failed.

I checked all the connections the lid is on and I got a connection but i cannot get the panogear to make any shots why?

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Mon Jan 17, 2011 7:49 pm

here is what the log says:

Code: Select all
2011-01-17 19:35:00,967::Shooting::INFO::Start shooting process...
2011-01-17 19:35:00,971::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last):  File "papywizard/model/shooting.pyc", line 517, in start  File "papywizard/model/data.pyc", line 266, in createHeader  File "papywizard/model/data.pyc", line 179, in _serializeIOError: [Errno 2] No such file or directory: u'/Users/jeremypronk/papywizard_%(date_time)s_%(mode)s.xml'
2011-01-17 19:35:00,971::Shooting::ERROR::Shoot process failed
2011-01-17 19:35:01,904::Shooting::INFO::Start shooting process...
2011-01-17 19:35:01,908::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last):  File "papywizard/model/shooting.pyc", line 517, in start  File "papywizard/model/data.pyc", line 266, in createHeader  File "papywizard/model/data.pyc", line 179, in _serializeIOError: [Errno 2] No such file or directory: u'/Users/jeremypronk/papywizard_%(date_time)s_%(mode)s.xml'
2011-01-17 19:35:01,908::Shooting::ERROR::Shoot process failed

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Mon Jan 17, 2011 8:01 pm

here another log
Code: Select all
2011-01-17 19:58:23,283::Shooting::INFO::Start shooting process...
2011-01-17 19:58:23,297::Shooting::INFO::Moving
2011-01-17 19:58:23,557::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:23,557::Spy::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:23,800::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:23,801::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:24,060::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:24,061::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:24,301::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:24,302::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:24,543::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:24,544::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:24,785::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:24,786::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:25,065::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:25,066::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:25,306::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:25,307::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:25,547::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:25,548::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:25,790::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:25,790::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:26,055::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:26,056::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:26,298::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:26,298::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:26,546::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:26,546::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:26,787::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:26,788::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:27,052::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:27,053::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:27,295::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:27,296::Spy::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:27,537::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:27,538::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:27,812::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:27,812::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:28,055::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:28,057::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying...
2011-01-17 19:58:28,297::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:28,298::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:28,540::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:28,540::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:28,805::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last):  File "papywizard/hardware/axis.pyc", line 236, in _sendCmd  File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang
2011-01-17 19:58:28,806::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying...
2011-01-17 19:58:28,807::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last):  File "papywizard/model/shooting.pyc", line 619, in start  File "papywizard/hardware/head.pyc", line 194, in stopAxis  File "papywizard/hardware/axis.pyc", line 373, in stop  File "papywizard/hardware/axis.pyc", line 402, in waitStop  File "papywizard/hardware/axis.pyc", line 273, in read  File "papywizard/hardware/axis.pyc", line 243, in _sendCmdHardwareError: Axis 1 can't send command
2011-01-17 19:58:28,807::Shooting::ERROR::Shoot process failed

no avatar
marco.lanciani
Member
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Thu Feb 23, 2006 2:55 pm
Location: Roma, Italy
Info

by marco.lanciani » Tue Jan 18, 2011 11:51 am

Hi Matthias,

- use an external USB Bluetooth device for a stable connection with your Mac.
- don't use "auto connect" on papywizard: it freeze the app.

I didn't upgraded the Merlin's firmwares yet and it's already quicker than using the hand controller. I'm using the GO TO version.

Regards,
Marco

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Tue Jan 18, 2011 9:37 pm

external USB BT did not work.
I do not use auto connect I always connect manually.
What is the GO TO version?

no avatar
marco.lanciani
Member
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Thu Feb 23, 2006 2:55 pm
Location: Roma, Italy
Info

by marco.lanciani » Wed Jan 19, 2011 12:15 am

mawa_73527 wrote:external USB BT did not work.
I do not use auto connect I always connect manually.
What is the GO TO version?

I mean the Merlin GO TO Version.
Marco

no avatar
mawa_73527
Member
 
Topic author
Posts: 45
Likes: 0 post
Liked in: 1 post
Joined: Mon Jan 19, 2009 9:31 pm
Location: Germany
Info

by mawa_73527 » Wed Jan 19, 2011 11:53 am

What is the Merlin GO TO version?

no avatar
marco.lanciani
Member
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Thu Feb 23, 2006 2:55 pm
Location: Roma, Italy
Info

by marco.lanciani » Wed Jan 19, 2011 1:17 pm

Hi Matthias,

here you can see Merlin Standard and Merlin GO TO:

http://www.apm-telescopes.de/pro_suche.php?action=suche&beschr=&suchbegriff=merlin&hersteller=

Regards,
Marco

User avatar
gkaefer
Member
 
Posts: 3550
Likes: 0 post
Liked in: 15 posts
Joined: Tue Jun 09, 2009 1:01 pm
Location: Salzburg
Info

by gkaefer » Wed Jan 19, 2011 1:28 pm

marco.lanciani wrote:Hi Matthias,

here you can see Merlin Standard and Merlin GO TO:

http://www.apm-telescopes.de/pro_suche.php?action=suche&beschr=&suchbegriff=merlin&hersteller=

Regards,
Marco

sorry for going offtopic here!

Hi Marco,

currently I've a non GoTo Version with PC+Bluetooth+Papywizzard up and running.
MY handcontroller has two broken direction buttons or the cabling is broken and the plugin for the shutterrelease is very loose so cable sometimes works and sometimes it can move and it no longer releases the shutter, so finally I plan to buy a new one...

can I take the GoTo version and I've nothing to change in case of panoramas + I get an additional GoTo so I can go my first steps in astronomy...?

Liebe Gruesse,
Georg
Last edited by gkaefer on Wed Jan 19, 2011 1:30 pm, edited 1 time in total.

no avatar
mediavets
Moderator
 
Posts: 16414
Likes: 2 posts
Liked in: 130 posts
Joined: Wed Nov 14, 2007 2:12 pm
Location: Isleham, Cambridgeshire, UK.
Info

by mediavets » Wed Jan 19, 2011 3:09 pm

mawa_73527 wrote:external USB BT did not work.
I do not use auto connect I always connect manually.

Make sure you are using Papywizard 2.0 and not 2.1.

Then, try again with the external USB-BT device and these guidance notes:
http://www.autopano.net/forum/p48089-2009-07-04-17-14-56#p48089

We know there are users who have this working - so...
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.

no avatar
marco.lanciani
Member
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Thu Feb 23, 2006 2:55 pm
Location: Roma, Italy
Info

by marco.lanciani » Thu Jan 20, 2011 1:19 am

gkaefer wrote:
marco.lanciani wrote:Hi Matthias,

here you can see Merlin Standard and Merlin GO TO:

http://www.apm-telescopes.de/pro_suche.php?action=suche&beschr=&suchbegriff=merlin&hersteller=

Regards,
Marco

sorry for going offtopic here!

Hi Marco,

currently I've a non GoTo Version with PC+Bluetooth+Papywizzard up and running.
MY handcontroller has two broken direction buttons or the cabling is broken and the plugin for the shutterrelease is very loose so cable sometimes works and sometimes it can move and it no longer releases the shutter, so finally I plan to buy a new one...

can I take the GoTo version and I've nothing to change in case of panoramas + I get an additional GoTo so I can go my first steps in astronomy...?

Liebe Gruesse,
Georg

Hi Georg,

I think so... I took a GoTo version from APM and now it has the cable release connection.
I did also some tests with the Promote Control and everything seems to work OK. Full wireless operation through my MacBook Pro.

I did take the GoTo version to get back to astronomy... I was an astrophotographer and I'd like to restart.

User avatar
AlexandreJ
Kolor Team
 
Posts: 5988
Likes: 7 posts
Liked in: 10 posts
Joined: Mon Nov 14, 2005 4:56 pm
Location: Francin, France
Info

by AlexandreJ » Tue Feb 01, 2011 3:34 pm

Have a try on our new all in one package for Papywizard for mac here :
http://www.autopano.net/forum/t11100-papywizard-for-apple-mac-package

User avatar
gkaefer
Member
 
Posts: 3550
Likes: 0 post
Liked in: 15 posts
Joined: Tue Jun 09, 2009 1:01 pm
Location: Salzburg
Info

by gkaefer » Thu Mar 03, 2011 12:08 am

Hi all,

I'm asking in name of Josef / 120to120

he installed 2.1.20 on his mac and it worked with cabling and with external BT module perfectly until today. why cant be reproduced...

following error is shown:

Code: Select all
2011-03-02 18:44:50,711::Shooting::EXCEPTION::Shooting.start()
Traceback (most recent call last):
  File "papywizard/model/shooting.pyc", line 528, in start
  File "papywizard/model/data.pyc", line 270, in createHeader
  File "papywizard/model/data.pyc", line 182, in _serialize
IOError: [Errno 2] No such file or directory: u'/Users/macbook/Desktop/pw_da/papywizard_2011-03-02_18h44m50s_mosaic.xml'
2011-03-02 18:44:50,711::Shooting::ERROR::Unhandled exception in shoot process

2011-03-02 18:44:50,714::Main::DEBUG::ShootController.__onShootingStopped(): status=fail

what did he wrong, or what happend, how can this missing file recreated or how can the config be changed on mac so this file is no longer requested by pw?

if possible also answer bilingual german/english so communication can be optimized...

Liebe GrüàŸe,
Georg

User avatar
klausesser
Member
 
Posts: 8830
Likes: 5 posts
Liked in: 63 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Thu Mar 03, 2011 12:19 pm

gkaefer wrote:what did he wrong, or what happend, how can this missing file recreated or how can the config be changed on mac so this file is no longer requested by pw?

if possible also answer bilingual german/english so communication can be optimized...

Liebe GrüàŸe,
Georg

Hi!

After installing the actual PW for Mac version - Alexandre´s link - it worked on my MacBopok Pro with 10.6.6 without problems.
So it guess it might be an issue with the settings - they´re sometimes somewhat funny in PW . . :cool:

Earlier versions sometimes had problems with the Mac´s BT - but this is gone.

Nach dem Installieren der aktuellen PW für Mac Verision - siehe Alex´- Link là¤uft PW auf meinem MacBook Pro ohne Probleme.
Ich vermute daher ein Problem bei den Einstellungen von PW - die sind ja manchmal etwas undurchsichtig . . :P

Frühere Versionen hatten schonmal Probleme mit der BT Schnittstellen des Macs. - aber das ist gelaufen.


best, Klaus
Simplicity is the keynote of all true elegance. Coco Chanel

User avatar
fma38
Moderator
 
Posts: 5850
Likes: 2 posts
Liked in: 2 posts
Joined: Wed Dec 07, 2005 6:21 pm
Location: Grenoble, France
Info

by fma38 » Thu Mar 03, 2011 6:31 pm

Carefully check if the '/Users/macbook/Desktop/pw_da/' exists, and is writable...
Frédéric

User avatar
gkaefer
Member
 
Posts: 3550
Likes: 0 post
Liked in: 15 posts
Joined: Tue Jun 09, 2009 1:01 pm
Location: Salzburg
Info

by gkaefer » Fri Mar 04, 2011 12:57 pm

Thanka Klaus & Frederic,

Josef informed me yesterday evening he could solve his problem. He initially saved the logfile in a folder on his desktop which he did move in between. After restarting pw later... he could solve this...

Liebe GrüàŸe,
Georg
Last edited by gkaefer on Fri Mar 04, 2011 12:58 pm, edited 1 time in total.

User avatar
fma38
Moderator
 
Posts: 5850
Likes: 2 posts
Liked in: 2 posts
Joined: Wed Dec 07, 2005 6:21 pm
Location: Grenoble, France
Info

by fma38 » Fri Mar 04, 2011 1:35 pm

Good.
Frédéric


Who is online

Users browsing this forum: No registered users and 2 guests