Image-stitching and virtual tour solutions My account Updates
It is currently Thu Oct 23, 2014 3:33 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Oct 21, 2010 10:34 am 
Offline
Member
User avatar

Joined: Wed Sep 22, 2010 6:11 am
Posts: 50
Location: Japan
Hi !

T and C Controller I am pleased to buy.
Simple and easy to use, light and small.
This notebook PC will be released from a bit heavy.
The simple question that I wanted to use:
1. Why in the Portrait and Landscape What difference Pitch arm side.
à€€à€€[Maybe so decided to simplify the operation?]
2. Why at Landscape mode, yaw axis What a slow movement.
[Although I support the load if the pitch axis is supposed to be far more serious]
[Papywizard if moved faster and 200mm lens.]
3. And then proceed to select a profile head to rotate slightly to the left.
The number 2 is most in need.

Very glad to be resolved.

_________________
Blog:http://uhrp.imagefitter.com/
Panogear(FW 020781);BT (Serial COM40);Pw(FW 2.1.20-1);Dell vostro1200(xp sp3)
TouchCP(FW 2.0) Autopano Giga(v2.0.9)
Nikon D300S;Nikkor AF 28-200mm;Nikkor AF-S 300mm


Last edited by mamoo on Thu Oct 21, 2010 8:01 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 21, 2010 2:55 pm 
Offline
Member

Joined: Mon May 22, 2006 12:18 am
Posts: 7806
Location: Duesseldorf, Germany
mamoo wrote:
Hi !

T & C Controller I am pleased to buy.
Simple and easy to use, light and small.
This notebook PC will be released from a bit heavy.
The simple question that I wanted to use:
1. Why in the Portrait and Landscape What difference Pitch arm side.
à€€à€€[Maybe so decided to simplify the operation?]
2. Why at Landscape mode, yaw axis What a slow movement.
[Although I support the load if the pitch axis is supposed to be far more serious]
[Papywizard if moved faster and 200mm lens.]
3. And then proceed to select a profile head to rotate slightly to the left.
The number 2 is most in need.

Very glad to be resolved.

1) in landscape-mode the camera´s body is very much smaller on it´s left side - so it can be moved closer to the arm when the arm is on the left. You can match the NPP better.
In landscape-mode using the "L" bracket the T&C automatically wants the arm on the left side.
2) Using the T&C and the Kolor-provided LI Batteries the movement is faster,
and using the Merlin´s newest firmware it´s again MUCH faster.

best, Klaus

_________________
Simplicity is the keynote of all true elegance. Coco Chanel


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 21, 2010 3:05 pm 
Offline
Member

Joined: Sat Nov 28, 2009 6:10 pm
Posts: 20
Hallo mamoo,
the answer to 1. is: if you work in portrait mode and the handle of the camera looks downwards you can get problems to move the camera into zenit position (the space is to small). In landscape you cannot get close to the turningpoint if the handle of the camera is in direction of the vertical arm
to 2: the reason is the fimware of the head. If you have 020681 firmware, the head is almost 3 times slowlier than with firmware 020781. Alexandre Faure from Kolor can help you with an update of your head firmware.
to 3: the reason for that short movement is that the remaining battery voltage will be meassured under working conditions, or you would get always a full battery sign even if it is not true.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 21, 2010 5:08 pm 
Offline
Member
User avatar

Joined: Wed Dec 07, 2005 6:21 pm
Posts: 5826
Location: Grenoble, France
For the point #2, the strange thing is that mamoo get faster results with Papywizard than with T&C controller...

_________________
Frédéric

Canon 20D + 17-40/f4 L USM + 70-200/f4 L USM + 50/f1.4 USM
Merlin/Orion panohead + Papywizard on Nokia N800 and HP TC-1100


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 21, 2010 5:29 pm 
Offline
Member

Joined: Wed Nov 14, 2007 2:12 pm
Posts: 14039
Location: Isleham, Cambridgeshire, UK.
fma38 wrote:
For the point #2, the strange thing is that mamoo get faster results with Papywizard than with T&C controller...

But will/does the 02.07.81 firmware with V2 Merlin heads also produce higher performance when using Papywizard?
.............
And answering my own question on the other thread:
http://www.autopano.net/forum/p71131-today-15-45-39#p71131

It seems that the V2 Merlin and associated 02-series firmware still exhibits the stepping effect when controlled by Papywizard using long focal length lenses; reading back I see that Mamoo has a V2 Merlin mount with 02.06.81 firmware.

_________________
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 22, 2010 6:41 am 
Offline
Member
User avatar

Joined: Wed Sep 22, 2010 6:11 am
Posts: 50
Location: Japan
Thank you All !

1. There is no point at which the operation of the pitch axis to reverse the position of the arm for sure.
2. josefgraessle in the comments, I've seen the light of hope.
3. Check my battery no idea.

Thank you

_________________
Blog:http://uhrp.imagefitter.com/
Panogear(FW 020781);BT (Serial COM40);Pw(FW 2.1.20-1);Dell vostro1200(xp sp3)
TouchCP(FW 2.0) Autopano Giga(v2.0.9)
Nikon D300S;Nikkor AF 28-200mm;Nikkor AF-S 300mm


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group