open image in APP  

Share your tips and tricks here or get help with any Autopano Pro / Giga problem!
No bug reports (of any kind) in this forum!
no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

open image in APP

by gcarr » Sun Jan 25, 2009 5:00 pm

I guess everyone has to learn to walk before running and I'm discovering creating panoramas duly applies.
I have experienced problems such as simply trying to open or find a folder as taught by the tutorial and while it worked at first, simply stopped working. Anyway I discovered another 'tool' opens it for me. Andrew has been very helpful and suggested that my images don't have the proper EXIF information alongside the image at the bottom. He suggested opening a folder in APP of unprocessed images right from the camera (with no pre-processing) and double click on an image and I'll see this EXIF info. However I am unable to open ANY individual image in APP because every time I do this I get a message popping up that says "Select more than one image to build a panorama!'
What's my problem?
Thanks, Gary



User avatar
fma38
Moderator
 
Posts: 5850
Likes: 2 posts
Liked in: 2 posts
Joined: Wed Dec 07, 2005 6:21 pm
Location: Grenoble, France
Info

by fma38 » Sun Jan 25, 2009 5:08 pm

Just because APP is unable to do anything with only 1 image. Select 2 images, and all will work fine.
Frédéric

no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

by gcarr » Sun Jan 25, 2009 5:22 pm

I'm not trying to create a panorama at this point -only to see the EXIF info attached to each image. Andrew
was able to open ONE image.


Last edited by gcarr on Sun Jan 25, 2009 5:25 pm, edited 1 time in total.

User avatar
klausesser
Member
 
Posts: 8836
Likes: 5 posts
Liked in: 64 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Sun Jan 25, 2009 5:28 pm

gcarr wrote:I'm not trying to create a panorama at this point -only to see the EXIF info attached to each image. Andrew
was able to open ONE image.

Frédéric´s right. You have to import at least 2 images. APP is a stitcher - you can´t stich a single image . . . :cool:

My workflow is to select/grab all the pics i need inside their folder and move them into the group-window.
Simplicity is the keynote of all true elegance. Coco Chanel

no avatar
mediavets
Moderator
 
Posts: 16415
Likes: 2 posts
Liked in: 130 posts
Joined: Wed Nov 14, 2007 2:12 pm
Location: Isleham, Cambridgeshire, UK.
Info

by mediavets » Sun Jan 25, 2009 5:59 pm

gcarr wrote:I'm not trying to create a panorama at this point -only to see the EXIF info attached to each image. Andrew
was able to open ONE image.

Look at this sequence on screenshots - and try to emulate the process.

1. Add a New Group.
2. Select Add Images.
3. Select the images you wish to add.
4. Double click on a thumbnail image in the group panel.
5. View the image with EXIF data overlayed if it is available.

Clear now? Rocket science it ain't. :rolleyes:

I always select the images I want to stitch this way rather than letting APP try to figure out which images make up a pano from a mass of images in a folder.










Last edited by mediavets on Sun Jan 25, 2009 6:06 pm, edited 1 time in total.
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.

User avatar
klausesser
Member
 
Posts: 8836
Likes: 5 posts
Liked in: 64 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Sun Jan 25, 2009 6:08 pm

mediavets wrote:Clear now? Rocket science it ain't. :rolleyes:

nope - but you can go to little planets with it . . . don´t you?
:P

besz, Klaus
Simplicity is the keynote of all true elegance. Coco Chanel

no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

by gcarr » Sun Jan 25, 2009 11:52 pm

klausesser wrote:
mediavets wrote:Clear now? Rocket science it ain't. :rolleyes:

nope - but you can go to little planets with it . . . don´t you?
:P

besz, Klaus

Andrew - it's obvious that the software you're using and the software I'm using are quite different. Take a look at your step by step and compare to mine. Right from the start it's different right through. As you can see I don't get the thumbnails that you earlier spoke about. And when I click 'open' it goes directly to the stitched image. I don't see where I can open mine the way you do. I would appreciate hearing from other Mac users. It's not rocket science. It's Microsoft software.
Gary








Last edited by gcarr on Sun Jan 25, 2009 11:59 pm, edited 1 time in total.

User avatar
klausesser
Member
 
Posts: 8836
Likes: 5 posts
Liked in: 64 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Mon Jan 26, 2009 12:44 am

"Andrew - it's obvious that the software you're using and the software I'm using are quite different. "

No. Despite Andrew uses a PC and you (and i) use a Mac there´s no such difference in terms of your problem.
I know very well what you´re showing in your screenshots.

Please follow the steps:

1) use the splitted view (6th icon from the left)
2) select a new group-window.
3) select/grab your images and move them into the group-window.
4) use "Auto" as colorcorrection
5) use the anchors-tool to set a "hard anchor" to a spot which you wish to have as a reference for the whole image.
you can set more than one and change thy type of the anchors.

6) read the documetation - it´s rudimentary i know, but it helps.
http://www.autopano.net/wiki/action/view/Color_and_Brightness#Color_Correction_Setup

best, Klaus








Simplicity is the keynote of all true elegance. Coco Chanel

no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

by gcarr » Mon Jan 26, 2009 2:24 am

I appreciate a Mac user taking me through this as A-B may be the same getting there is not. First of all the steps you're now showing me are totally different than the tutorial. So I appreciate your input. First of all I looked at your last image and it didn't show the EXIF in the bottom left corner that Andrew shows. I assume by your comments that there is no difference between Mac programs and PC's. I got as far as third image before running into snags. The first image fine.
The second image I couldn't 'drag' a folder into box area however I was able to open a folder. See image three. Ok here's where I hit a snag - there is as you can see no 'AUTO' as colorcorrection so I stopped at stage 3. Can you help me here? (Beginning at 4))
Thanks ,
Gary






Last edited by gcarr on Mon Jan 26, 2009 2:29 am, edited 1 time in total.

User avatar
Tim.Lewis
Member
 
Posts: 208
Likes: 0 post
Liked in: 0 post
Joined: Sat Dec 27, 2008 7:44 am
Location: Perth, Western Australia
Info

by Tim.Lewis » Mon Jan 26, 2009 5:51 am

Hi gcarr

Here is my attempt to give you the low down. Hope this helps:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Finished output on desktop:

Image

Cheers

Tim
Last edited by Tim.Lewis on Mon Jan 26, 2009 5:52 am, edited 1 time in total.
Plus ça change, plus c'est la même chose.

no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

by gcarr » Mon Jan 26, 2009 6:12 am

Tim - you're just what the Doctor ordered. It's great to see a Mac user explain it so clearly. And best of all is my 'tools' worked were exactly as you described. My wife and I were most fortunate to visit our son in Australia who was on an exchange program in medicine in Brisbane. We fell in love with your country.
Gary

User avatar
Tim.Lewis
Member
 
Posts: 208
Likes: 0 post
Liked in: 0 post
Joined: Sat Dec 27, 2008 7:44 am
Location: Perth, Western Australia
Info

by Tim.Lewis » Mon Jan 26, 2009 6:27 am

Hi Gary

Glad to help. It was all done on a great little free program called Skitch.

http://skitch.com/

You may find it handy if you run into other problems.

I did not go into detail about optimising the stitching etc., but you will probably find you are pretty right from here on in. Everyone here is so helpful, so you will likely get the tips you need as you need them just as I have.

Cheers

Tim
Plus ça change, plus c'est la même chose.

User avatar
klausesser
Member
 
Posts: 8836
Likes: 5 posts
Liked in: 64 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Mon Jan 26, 2009 1:56 pm

Tim.Lewis wrote:Hi gcarr

Here is my attempt to give you the low down. Hope this helps:

Tim

Hey Tim, hi gcarr!

Great explanation! I didn´t go far enough i realize now . . :cool:

best, Klaus
Simplicity is the keynote of all true elegance. Coco Chanel

no avatar
gcarr
Member
 
Topic author
Posts: 30
Likes: 0 post
Liked in: 0 post
Joined: Thu Jan 08, 2009 8:11 pm
Location: toronto Canada
Info

by gcarr » Mon Mar 30, 2009 2:10 am

Tim - I've been sailing along making some pans and then ran in to a problem.
I open the file with pictures no problem- then I want to 'start detection' however what comes up is only part of screen. Here's what i get:


/Users/garycarr/Desktop/Picture 1.png
/Users/garycarr/Desktop/detection.skitch
Any ideas?
Gary

User avatar
klausesser
Member
 
Posts: 8836
Likes: 5 posts
Liked in: 64 posts
Joined: Mon May 22, 2006 12:18 am
Location: Duesseldorf, Germany
Info

by klausesser » Mon Mar 30, 2009 11:02 am

gcarr wrote:Tim - I've been sailing along making some pans and then ran in to a problem.
I open the file with pictures no problem- then I want to 'start detection' however what comes up is only part of screen. Here's what i get:


/Users/garycarr/Desktop/Picture 1.png
/Users/garycarr/Desktop/detection.skitch
Any ideas?
Gary

Hi gary - what kind of link is that?

Kaus
Simplicity is the keynote of all true elegance. Coco Chanel


Who is online

Users browsing this forum: No registered users and 3 guests