Image-stitching and virtual tour solutions My account Updates
It is currently Mon Sep 15, 2014 3:11 am

All times are UTC + 1 hour




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Jan 09, 2009 9:01 am 
Offline
New member

Joined: Wed Jan 16, 2008 10:41 pm
Posts: 7
Hi guys.

I never had this problem before,

stitching works fine 2.99 but now I have a nadir in the middle of the photo and everything is around it. here is the photo http://www.flickr.com/photos/33182528@N08/3181142745/sizes/l/

8 photos are in jpg. shot 10.5mm nikkor. bottom is photoshop with Alpha layer to tiff. and then stitched together. I did this million times never had problem.

what did I do wrong? All started recently with all panoramas.

Thanks in Advance

MIKE


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 09, 2009 9:44 am 
Offline
Member

Joined: Wed Nov 14, 2007 2:12 pm
Posts: 13939
Location: Isleham, Cambridgeshire, UK.
You did nothing wrong.

APP tries to figure out how to orientate a panorama but sometimes you end up with this.

Just re-orienetate it yourself - it is easy:

http://www.autopano.net/wiki/action/view/How_to_straighten_a_panorama

_________________
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 09, 2009 12:33 pm 
Offline
New member

Joined: Wed Jan 16, 2008 10:41 pm
Posts: 7
thanks.

I tried to correct it with vertical lines. and I just should try to click the central point. Thanks a lot


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 09, 2009 12:36 pm 
Offline
Member

Joined: Wed Nov 14, 2007 2:12 pm
Posts: 13939
Location: Isleham, Cambridgeshire, UK.
regardit.eu wrote:
thanks.

I tried to correct it with vertical lines. and I just should try to click the central point. Thanks a lot

When your initial preview is displayed as you showed - with nadir centred at 0/0 location - try using the Yaw/Pitch/Roll button and entering a value of 90 or -90 for pitch then click the tick symbol.

It may end up upside down - in which case use the 180 button.

After that use the Automatic horizon button - that will usually level it up fine.

It it doesn't then use the Vertical lines tool to get it spot on.

_________________
Andrew Stephens
Many different Nodal Ninja and Agnos pano heads. Merlin/Panogear mount with Papywizard on Nokia Internet tablets.
Nikon D5100 and D40, Sigma 8mm f3.5 FE, Nikon 10.5mm FE, 35mm, 50mm, 18-55mm, 70-210mm. Promote control.


Last edited by mediavets on Fri Jan 09, 2009 12:39 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 19, 2009 12:54 pm 
Offline
New member

Joined: Wed Jan 16, 2008 10:41 pm
Posts: 7
Ok I gave it a try. what happens now, is that the panorama is inside out. very strange. There might be a problem with the nadir, as I shot it hand held.

I still work on the panorama. As a practice. Did compare the result wit PT gui, the reslt was nearly same. I did screw my settings or something.

I also tested it with all 36 photos as it is in HDR. The result was perfect match, but the Nadir was missing. I included the photos for nadir but something went wrong.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 19, 2009 2:06 pm 
Offline
Member

Joined: Tue Feb 21, 2006 5:32 pm
Posts: 1285
Location: Connecticut, USA
Sounds like your pano is now centered on the vertex, not the nadir. Just use the centerpoint tool, click on a point to the left (or right) of your pano that looks like its on the horizon or where the horizon should be. Then use the 90 degreee rotation tool. You may have to do a 180 rotation if you pick the wrong 90 degree tool (one goes clockwise, the other counterclockwise)

If the nadir is missing, look for the photos or panos that are unlinked.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group