Nodal Point - Nodal Ninja RS 2 ring mount  

Discuss the various manual panoramic heads on the market, ask for advice, etc...
(EN/FR Forum)
no avatar
Marc Lucas
Member
 
Topic author
Posts: 14
Likes: 0 post
Liked in: 0 post
Joined: Tue Nov 22, 2016 2:04 pm
Info

Nodal Point - Nodal Ninja RS 2 ring mount

by Marc Lucas » Sun Dec 11, 2016 11:13 pm

Hi

Just got the Nodal Ninja RS 2 and using the ring mount adaptor for the Sigma 8mm fisheye. The only way to achieve the Nodal point is to position the camera so far back that the side of the bracket can be seen in lens. Is this going to cause problems with the stitching or will the overlap (taking 3 images with a 180degrees lens) sort things out?
Attachments
Lens.png

User avatar
Destiny
Moderator
 
Posts: 7629
Likes: 2 posts
Liked in: 193 posts
Joined: Mon Apr 26, 2010 11:55 pm
Location: Australia
Info

Re: Nodal Point - Nodal Ninja RS 2 ring mount

by Destiny » Mon Dec 12, 2016 12:51 am

Hi.. That does not sound right.. I would suggest you check in with Bill Bailey @ Nodal Ninja and ask him for some suggestions on this.. He will respond very quickly....

Destiny...

no avatar
Marc Lucas
Member
 
Topic author
Posts: 14
Likes: 0 post
Liked in: 0 post
Joined: Tue Nov 22, 2016 2:04 pm
Info

Re: Nodal Point - Nodal Ninja RS 2 ring mount

by Marc Lucas » Mon Dec 12, 2016 1:07 am

I'm also going to contact the vendor and see what they suggest also. Do you just send a contact email to Bill through the site?

User avatar
Destiny
Moderator
 
Posts: 7629
Likes: 2 posts
Liked in: 193 posts
Joined: Mon Apr 26, 2010 11:55 pm
Location: Australia
Info

Re: Nodal Point - Nodal Ninja RS 2 ring mount

by Destiny » Mon Dec 12, 2016 2:11 am

Yes, I think so. He will read your message fairly quickly but don't forget they are in the US...

Destiny..

Marc Lucas wrote:I'm also going to contact the vendor and see what they suggest also. Do you just send a contact email to Bill through the site?

no avatar
jimbee
Member
 
Posts: 54
Likes: 5 posts
Liked in: 8 posts
Joined: Sat Aug 22, 2009 2:56 am
Location: Upstate New York
Info

Re: Nodal Point - Nodal Ninja RS 2 ring mount

by jimbee » Thu May 11, 2017 3:15 pm

Marc Lucas wrote:I'm also going to contact the vendor and see what they suggest also. Do you just send a contact email to Bill through the site?


Good if you can post here what you find out.


Who is online

Users browsing this forum: No registered users and 1 guest