 |
|
|
|
|
|
 |
| ||||||||
 |
 
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| 
| User list | You are not logged in.
I have installed Windows 7 64-bit, replacing XP and installede Autopano 64-bit.
But when I come to the panorama editor, theres is no image in the main window.
I can render it from there, but i have no possibility for adjustment.
How can i fix this??
Last edited by autojan65 (2010-02-22 12:58:58)
Offline
Was this a clean install of Windows 7 or an upgrade of an installation of XP?
Offline
Do you have GPU enabled in APP settings? Also, in the Panorama Editor, check at the bottom to see at what % magnification the pano is displayed at. There were random reports of panos "showing" at less than 1% or something like that, thus hardly visible.
Offline
GPU processing does not work. When i enable it i got this GPU-error message: "The GL_ARB_texture_float Open GL extension is not present".
There is no image whatever magnification i have.
Offline
stupid question: also tried with version 2.0.6 ?
stupid question 2: brand new win7 install = at the same time of installation its outdated. >200mb updates available... win7 updated?
perhaps check graphics card - driver - win7 driver must not be the best choice, perhaps newer version from manufaturor homepage can help...
Georg
Last edited by gkaefer (2010-02-24 11:50:00)
Offline
Yes i have also tried version 2.0.6, the latest
Windows 7 is updated "up to date"
I have the latest driver for graphic card (Matrox Mill M9120 pcix16), but have not tried older drives
I suppose Kolor must have a solution for this (i have posted them the problem)
PS: There is no stupid questions!
Offline
Could you post a screenshot, maybe it will help?
Offline
ok, can you give me a hint how i do that? how do i post a screenshot?
thanks
Offline
In the settings, when i enable the "gpu-processing", i got this error message: "The GL_ARB_texture_float Open GL extension is not present".
When i check it, the info is this:
"OGL Version: 2.0
Render: Matrox ICD for M-Series
Vendor: Matrox Graphics Inc.
Shader Version: 1.10 Matrox GLSL compiler
MaxTextureSize: 16320
MaxTextureUnits: 4
MaxColorAttachement: 4
MaxRenderBufferSize: 16320
Extentions:
GL_ARB_depth_texture
GL_ARB_draw_buffers
GL_ARB_fragment_program
GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader
GL_ARB_multisample
GL_ARB_multitexture
GL_ARB_occlusion_query
GL_ARB_point_parameters
GL_ARB_point_sprite
GL_ARB_shader_objects
GL_ARB_shading_language_100
GL_ARB_shadow
GL_ARB_texture_border_clamp
GL_ARB_texture_compression
GL_ARB_texture_cube_map
GL_ARB_texture_env_add
GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar
GL_ARB_texture_env_dot3
GL_ARB_texture_mirrored_repeat
GL_ARB_texture_non_power_of_two
GL_ARB_texture_rectangle
GL_ARB_transpose_matrix
GL_ARB_vertex_buffer_object
GL_ARB_vertex_program
GL_ARB_vertex_shader
GL_ARB_window_pos
GL_ATI_element_array
GL_ATI_separate_stencil
GL_ATI_vertex_array_object
GL_Autodesk_valid_back_buffer_hint
GL_EXT_bgra
GL_EXT_blend_color
GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate
GL_EXT_blend_logic_op
GL_EXT_blend_minmax
GL_EXT_blend_subtract
GL_EXT_clip_volume_hint
GL_EXT_compiled_vertex_array
GL_EXT_draw_range_elements
GL_EXT_fog_coord
GL_EXT_framebuffer_object
GL_EXT_multi_draw_arrays
GL_EXT_packed_pixels
GL_EXT_point_parameters
GL_EXT_rescale_normal
GL_EXT_secondary_color
GL_EXT_separate_specular_color
GL_EXT_shadow_funcs
GL_EXT_stencil_wrap
GL_EXT_subtexture
GL_EXT_texture3D
GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp
GL_EXT_texture_env_add
GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3
GL_EXT_texture_lod_bias
GL_EXT_texture_object
GL_EXT_texture_rectangle
GL_EXT_vertex_array
GL_IBM_texture_mirrored_repeat
GL_KTX_buffer_region
GL_NV_blend_square
GL_NV_texgen_reflection
GL_NV_texture_rectangle
GL_SGIS_generate_mipmap
GL_SGIS_multitexture
GL_SGIS_texture_lod
GL_WIN_swap_hint
WGL_EXT_swap_control
Under "rending" in settings, the GPU processing is not the same as the reference (as it should be)
I run Gigabyte GA-EX58 motherboard, Intel Core i7 quad processor7-920 with Matrox Mill M9120 pcix16.
Offline
autojan65 wrote:
ok, can you give me a hint how i do that? how do i post a screenshot?
thanks
Use Post Reply - rather than Quick Post - that will give you an image upload facility below the message edit box:
Last edited by mediavets (2010-02-24 23:29:17)
Offline
Here is a screenshot
...and two more...
Last edited by autojan65 (2010-02-25 08:12:54)
Offline
There must be an solution on this problem, but what?
I got answer from support "It must be a driver issue", but that does not help me much
Is there not one Autopano-user with a similiar problem?
Offline
I changed the slot for the graphic card in the motherboard, and then i finally had the image in the panorama editor.
but after a restart it was gone again!!!
Offline
Alexandre J: you fixed it on this link!
http://www.autopano.net/forum/t7246-app … ama-window
can you fix it for me too?
Offline
I downloaded previous versions and had to go back to 1.4.2 to get it work
Offline
Hmmm, I suppose it's some kind of "misunderstanding" between the Matrox driver and APP. Sorry that I cannot be of more help... Have you tried removing the Matrox drivers and letting W7 find/use his own?
Offline
autojan65 wrote:
I changed the slot for the graphic card in the motherboard, and then i finally had the image in the panorama editor.
but after a restart it was gone again!!!
How committed are you to this Matrox graphics card?
Perhaps the solution is to switch to a different card - at least in the short term?
You could pick up a used Nvidia GPU-based - and hence known to work - card pretty cheaply.
Last edited by mediavets (2010-03-01 13:33:08)
Offline
If i remove the Matrox card and let W7 find its own, the image appear in the panorama window.
Its strange, i have bought a expensive graphic card which dont work perfect with app, but the buildt-in card works. I dont understand that.
here is the link to the card:
http://www.komplett.no/k/ki.aspx?sku=36 … roductTabs
Offline
The Matrox M-series cards are not primarily aimed at graphics applications AFAIK.
IMO you'd do better with a used Nvidia GeForce gaming card which would definitely work with APP/APG GPU mode.
Last edited by mediavets (2010-03-01 18:19:49)
Offline
Ok, maybe it will be better with another card
But it looks that i finally have found the solution on my main problem: "No image in panorama editor"
Look at this link: (M-series - M9120 PCIe x16 - drivers - windows 7 64-bit)
http://www.matrox.com/graphics/en/support/drivers/
There is two drives. I had downloaded the newest (upper).
I decided to try the oldest of the two (bottom). And now i´m happy, the image is in the panorama editor (have restarted several times).
There is still no gpu though (the 3 images earlier in this thread is still there), but that is maybe not so important(?)
I say thank you for all help in this case (but maybe it will appear later, you never know)
Last edited by autojan65 (2010-03-01 18:44:35)
Offline
1 Sometimes a computer manufacturer will have a slightly different driver, so if the card came with your computer check with the manufacturer.
2 Don't remember if I caused this by too much link fiddling, or APP did it on the initial stitch, but sometimes the pano will show at a point other than the center of the screen, so you have to zoom out and then enlarge the crop area to find it.
Offline
Let me just encourage you to get a video card that will allow you to use the GPU acceleration in APP - it's beyond amazing 
in terms of speeding up your work! And a card costs $100 after all.
Offline
