 |
|
|
|
|
|
 |
| ||||||||
 |
 
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| 
| User list | Rules | You are not logged in.
Pages: 1
Anyone can tell me which cable to buy to use the Orion with these cameras:
Nikon D300S
Canon 5D
Ty very much
Fiore
Offline
not the complete answer, but here you can find an overview of cablenames & cammodels...
which one fits if more are listed should be easily be googled...
here you can look for the names listed for kolor panogear/orion/merlin:
http://www.kolor.com/panogear-motorized … ility.html
Georg
Offline
Sorry I'm newbie .. what I'd like to know is: after I have bought the Orion and Used a MAC with BT amd Paywizard and bought the Deltawave "PapyMerlin" Bluetooth module which cable do I need to connect the Nikon D300s and/or Canon 7d to connect them with the orion?
Ty
Fiore
Offline
strategy7 wrote:
Sorry I'm newbie .. what I'd like to know is: after I have bought the Orion and Used a MAC with BT amd Paywizard and bought the Deltawave "PapyMerlin" Bluetooth module which cable do I need to connect the Nikon D300s and/or Canon 7d to connect them with the orion?
Ty
Fiore
Offline
Ty very much Mediavets
Offline
Now I have the BT Module, cables but just now I understand have the GOTO Mount :-(
Any idea to connect the Nikon or Canon cable for the shutter release or to modify the Goto Mount to add the Snap ?
Will I resolve to buy the second version of ursaminor BT Module?
Ty
Fiore
Offline
strategy7 wrote:
Now I have the BT Module, cables but just now I understand have the GOTO Mount :-(
Any idea to connect the Nikon or Canon cable for the shutter release or to modify the Goto Mount to add the Snap ?
Will I resolve to buy the second version of ursaminor BT Module?
Ty
Fiore
Is your Merlin Mount a very old GoTo model?
See: http://www.kolor.com/forum/p93896-2012- … -28#p93896
Offline
If you have no "female stereo plug 2.5 mm" into the Snap shot port (see picture 1)
Then you must open the Merlin and look to the Main board, you will find te camera release connector (see picture 2)
You must connect this release connector with a small cable, 2 wires similar to RC material , and soldered on a "female stereo plug 2.5 mm" according to the schema (see picture 3)
Claude Offline
Ty very much for your replay claudevh !
I have found that the male pink jack 2,5mm of the camera have separate pole for Focus and Shutter instead on opto coupler prerealease and shutter are connected togheter.
This don't cause short circuit?
On the camera release connector have to respect the polarity?
Ty
Fiore
Offline
No one can help me to modify my Orion?
Fiore
Offline
Hello Fiore,
There is no risk of "short circuit" (as there is NO electricity on the cable), the optocoupler give a "dry contact" !
Just prepare a new cable with 2 wires:
one side will be connected to the 2 pins of the camera release connector on the main board inside the Merlin
the other side on the small female 2.5 mm stereo plug
Have a look on the 3 pictures in my previous post ...
Claude Offline
Pages: 1
