You are not logged in.

> The forum rules have been updated. Please take a moment to read them.

Pages: 1

 


#1 2011-03-29 13:57:59

dwindsor
New member
Registered: 2011-03-25
Posts: 2

Camera takes 3 shots....why?

I just received my panogear head...
I have it working with the control panel,
I have a Nikon 300 attached...
I program the camera to take one shot at each stop, but it takes 3....
is there something I can change
thank you
don

Offline

 

#2 2011-03-29 14:25:00

mediavets
Moderator
From: Isleham, Cambridgeshire, UK.
Registered: 2007-11-14
Posts: 9728
Website

Re: Camera takes 3 shots....why?

dwindsor wrote:

I just received my panogear head...
I have it working with the control panel,
I have a Nikon 300 attached...
I program the camera to take one shot at each stop, but it takes 3....
is there something I can change
thank you
don

Welcome to the forum...

Check the shutter settings on your camera - is it set for one shot per press or multi?

Have you unintentionally set AEB on the camera?

Andrew Stephens
Nikon D40, Nikkor 10.5mm fisheye, Sigma 8mm f3.5 fisheye, Nikkor 18-55/50/35mm lenses, Nodal Ninja 5 Lite, Nodal Ninja 4 with R-D16, Agno's MrotatorTCS short.
Nikon P5100, CP5000, CP995, FC-E8, WC-E63,WC-E68, TC-E2, Kaidan Kiwi 995, Bophoto pano bracket, Agno's MrotatorA.
Merlin/Orion robotic pano head + Papywizard on Nokia 770/N800/N810 and Windows 8/XP/2K.

Offline

 

#3 2011-03-29 16:48:03

dwindsor
New member
Registered: 2011-03-25
Posts: 2

Re: Camera takes 3 shots....why?

Thank you, you were absolutely correct...
sometime the obvious things are the hardest to find...
thanks again
Don

Offline

 

 

Pages: 1

Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson