Search found 1284 matches

Return to advanced search

Right. But in terms of keepig the Nadir-hole as small as possible i use -12° with my 15mm fisheye on fullframe. That gives me 6+Z shots @20° with my manual head and matches perfectly. Yes, but he has a Sigma 8mm f3.5 fisheye on his 5DMkII - that will give a circulart fisheye image with I think appr...
by hankkarl
Tue Jul 17, 2012 8:06 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: 5DMKii and Sigma 8mm Spherical Fisheyes
Replies: 24
Views: 3821

If you uncheck "use grid position" and re-optimize (start from a pano you showed above, not from new) what happens to the unlinked pictures? I suspect that this has to do with CPs getting put on the water instead of on land, and APG then cleaning them out because the grid is prefered. Georg showed t...
by hankkarl
Mon Jul 09, 2012 4:33 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Detecting settings
Replies: 13
Views: 2401

If you set app so only one layer of the images link to other stacks, then just move that layer and recaclulate.
by hankkarl
Mon Jun 18, 2012 2:48 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: [300A1] How to move a selection of images
Replies: 4
Views: 1105

If the photog was panning, then you should have a trapezoid. Think of panning a long wall. You will see parallax, and APP will try and project the wall onto a sphere, keeping the wall height the same. Thus, it "keystones" the image in the horizontal direction. One way around this may be to set the f...
by hankkarl
Mon Jun 18, 2012 2:47 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Position only?
Replies: 4
Views: 1125

Your first investment should be in knowledge. This won't cost anything but your time. Go and read the APG documentation, including the case studies and user tips. There is a lot of info on the internet. After you read the documentation, try using the string method (Explained in the documentation) an...
by hankkarl
Mon Jun 18, 2012 2:42 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: What do I need to create a virtual tour + use iPhone/iPad gyroscope?
Replies: 10
Views: 2202

Try using detection set to low. It may be that you have a sensor with some differences between the pixels. If APP only uses lumiance for detection, it may pick up these paterns. detection set to low decimates the pixels and may smooth out the differences between pixels. Also, running a smoothing fil...
by hankkarl
Wed Jun 13, 2012 6:45 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Control Points offset
Replies: 17
Views: 2775

Peter, Think of "render" as a way to save the output of APP. There are a lot of options here, more than with the normal windows save command. Look at all the options in the render checkllist which Georg posted above. The green vertical line is near the place where you select the output file. The sho...
by hankkarl
Wed Jun 13, 2012 6:36 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Saving panos
Replies: 7
Views: 1397

It’s amazing isn’t it. With the benefit of hindsight the answer is so obvious. Glad to hear you have resolved the issue. Unless I am mistaken i suggested the likely problem way back in this thread: http://www.kolor.com/forum/p99259-2012-05-21-14-41-38#p99259 I quote: "Perhaps: 1. You haven't up...
by hankkarl
Sun May 27, 2012 1:34 am
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Panotour/*.swf display problem?
Replies: 39
Views: 8625

I took it to mean "compare the HDR made using JPG to the one made using RAW"

highlight may not be the right word, "show the value of" may be a beter replacement for the word "highlight"
by hankkarl
Sun May 27, 2012 1:24 am
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Puzzling entry in wiki: HDR workflow D
Replies: 7
Views: 1500

Couple of thoughts: 1. use the lowest natural ISO. Some Canons are better at ISO 100 than ISO 50 (ISO 50 is an "extended" ISO). 2. you can use the selftimer instead of the remote. 2 seconds is enough if you can select the timer time. 3. there is some discussion that MLU is not needed at very long ex...
by hankkarl
Thu May 24, 2012 8:49 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

Motorized, can you put the tour up on the web on a test server so we can see what's going on?
by hankkarl
Thu May 24, 2012 8:41 pm
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Panotour/*.swf display problem?
Replies: 39
Views: 8625

I don't think it's embarrassingly bad for a first attempt, but all of your help on this thread will definitely help me improve upon it greatly. I think that if you look in the starting location and move horizontally you can see how the tables/couches are stretching on the bottom corners -- if someo...
by hankkarl
Wed May 23, 2012 7:33 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

To add to what mediavets said: Wood - real wood has unique grain. When you have a thin veneer of real wood, the grain may look the same in two adjacent peices becasue it is a thin shaving from the same board. Artificial wood-like formica or a plastic coating on real wood- has many repeated patterns....
by hankkarl
Wed May 23, 2012 7:29 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

The CPs explain a lot. The floor tiles are probably a regular geometric pattern -- it may look random, but I'll bet each tile is similar to another, or at least has a lot of similar features "randomly" distributed. Take the CPs off the floor and put them on the cabinet. Ceiling tiles will have the s...
by hankkarl
Wed May 23, 2012 5:29 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

Settings use detection "low" or "standard" and check "force every image . . . ". Can you make a screenshot of the cp-window? best, KLaus btw.: better use RAW - you can edit the white-balance. The color aof the light is ugly. ;) Exactly. And some internal panos have 3 light sources -- fluorescent li...
by hankkarl
Wed May 23, 2012 5:26 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

What does the address bar in your browser show? does it contain the string "images/panos" ? If not, you have the haysGalleriadata in the wrong place. It may be that an iframe defines the "fullscreen" to be the size of the iframe. This article may help http://help.videojs.com/discussions/problems/12...
by hankkarl
Wed May 23, 2012 3:44 pm
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Panotour/*.swf display problem?
Replies: 39
Views: 8625

I think there may be a vocabulary issue here: 1. Distortion - example is straight lines become curved They may be sharp or blurry. 2. Out of Focus, or soft focus - lines may be straight, but are blurry. At f/5 there are going to be some areas that are out of focus. If you autofocus on the center, it...
by hankkarl
Wed May 23, 2012 3:29 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Expanding Size of Pano (detection excessively overlaps)
Replies: 71
Views: 9021

Our software is not ICC aware. But you should not need that to be accurate because the monitor profile applies itself for all software, if installed correctly. The key word is "if" I recomend that you check that the profile is installed correctly. IIRC you can take the profile off of PS and if the ...
by hankkarl
Tue May 22, 2012 2:57 pm
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Newbie color correction problem
Replies: 4
Views: 1206

I haven't uploaded the files to a server. When I double click on the swf file it works fine. The *.swf is being called from a web page using this code.. <div class="videoFrame"> <object width="600" height="400"> <embed src="images/panos/haysGalleria.swf" width="600" height="400" allowFullScreen="tr...
by hankkarl
Tue May 22, 2012 2:51 pm
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Panotour/*.swf display problem?
Replies: 39
Views: 8625

Could be an issue with profiles. See http://ie.microsoft.com/testdrive/graphics/colorprofiles/default.html for one example.
I don't remember if APG uses the monitor profile or not, but AFIK lightroom does.
by hankkarl
Tue May 22, 2012 2:45 am
 
Forum: Using Autopano Pro / Autopano Giga
Topic: Newbie color correction problem
Replies: 4
Views: 1206

But what happens when Bing updates the photos in six months?

For this type of application, a drawing of the layout of the house may be better.
by hankkarl
Thu May 17, 2012 2:31 am
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Bing Map in Editor Hotspots
Replies: 15
Views: 2396

I see a stutter. dual xeon 5504 16GB DDR3 (Dell T7500) 3.84 Mb dsl (at this time) Stutter seems to happen in same place all the time in both ff and ie. And now that I'm looking for it, my panos seem to stutter also, but more than yours do. see http://hankkarl.com/Mystic-Seaport-VT/virtualtour.html
by hankkarl
Thu May 17, 2012 2:26 am
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Does the size have effect on stuttering?
Replies: 5
Views: 1246

Actually, the iPAD does not support Flash. So naturally, the Panotour Maps plugin is not compatible.
by hankkarl
Wed May 16, 2012 3:35 pm
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Bing Map on Ipad
Replies: 5
Views: 1192

The issue here may be that Bing maps photos and Google maps photos may be incorrect slightly due to parallax or any of the other issues we have come to know and "love". But even if you use Bing maps to set the points, there's no guarantee that Bing maps will show the same picture the next time. That...
by hankkarl
Wed May 16, 2012 3:29 pm
 
Forum: Using Panotour / Panotour Pro 1.8
Topic: Bing Map in Editor Hotspots
Replies: 15
Views: 2396
Next

Return to advanced search