 |
|
|
|
|
|
 |
| ||||||||
 |
 
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| 
| User list | You are not logged in.
usually, i shoot with a sigma, 8mm, all is perfect.
Today, i bought the 8-15 canon and ,no problem with the 8 and the 15mm.So what ?
When i am in the middle, autopano giga recognizes the 12mm but the panoramia is " horrible"", 2 pictures are no contact or not with the good one
Offline
the 8mm will/should be detected as fisheye
the 15mm will/should be detected as standard
... if the lens is not found in lens database or if exif data is lost (due to eventual editing by external program)...
can you check what autopano detects? fisheye or standard for the 8mm and the 15mm
and finally you can adopt the detected values by manually editing in autopano group->image properties...
Georg
CORRECZTION see below postings....
Last edited by gkaefer (2012-02-11 15:54:29)
Offline
hello, for both ,8-15 it detects fisheye and it works very well. But , when i use 12-13-14mm, it detects fisheye.I unchecked fisheye and the result is nearly same. I could send you the pictures by email, if you want, after all it,s a new lens ?
Offline
Didi wrote:
hello, for both ,8-15 it detects fisheye and it works very well. But , when i use 12-13-14mm, it detects fisheye.I unchecked fisheye and the result is nearly same.
Why uncheck fisheye? - it's a fisheye lens at all focal lengths.
I could send you the pictures by email, if you want, after all it,s a new lens ?
Yes, send me an image set - andrews[at]mediavets.co.uk
Offline
ok correct.
and have found alexandres posting:
http://www.kolor.com/forum/p94385-2012- … -10#p94385
so <15mm = fisheye and >16mm standard if no exif or lensid do define it different.
Georg
Offline
Why uncheck fisheye? - it's a fisheye lens at all focal lengths.
I know, i'm just trying solutions i am sending you pictures, thank's
Offline
Didi wrote:
Why uncheck fisheye? - it's a fisheye lens at all focal lengths.
I know, i'm just trying solutions i am sending you pictures, thank's
There is no way I can stitch images like those you sent me - for others intested in this issue here's a reduced size example.
You seem to have created a large grey border aorund the image which is itself set at an angle.
Can you send me just a reduced size set of JPEGS without the border please?
Offline
Well I straightened and cropped the border off your images.
They will stitch but there's little if any overlap between image 1 and image 5.
It seems you didn't use a consistent yaw separation on the 5-around.
Did you use a proper pano head with click stops?
Last edited by mediavets (2012-02-11 18:36:25)
Offline
oh yes i spent a long time for this. i'm " perfect " for this.
"You seem to have created a large grey border aorund the image which is itself set at an angle" i didn't ,it's on the logiciel.
Today , it works, but , now, my problem is the pano in panotour.I am not allowed to export face cube and i don't have the zenith and the nadir.
For the fun , i tried with another logiciel PT...and i got the same pano BUT it works very well on panotour.
dificult to understand, i tried to send you by email,andrews, but google said there is a problem with your name
Offline
Didi wrote:
dificult to understand, i tried to send you by email,andrews, but google said there is a problem with your name
Hope you replaced the "at" with a "@" ? 
best, Klaus
Last edited by klausesser (2012-02-13 17:34:47)
Offline
Didi wrote:
Today , it works, but , now, my problem is the pano in panotour.I am not allowed to export face cube and i don't have the zenith and the nadir.
Did you force a 360x180 pano FOV when stitching?
Offline
I did again and again and i have the answer, or so a solution
If i use the 8mm i must tip over the lens of 10 degre and add the zenith.
When i use 10-12-14mm, 3-4 photos a 0 degre and no zenith (Nadir as usual ,but no need absolutely)
Offline
