 |
|
|
|
|
|
 |
| ||||||||
 |
 
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| 
| User list | Rules | You are not logged in.
Hi
just got the panogear ...
installed papywizard 2.1x mac OS the latest. When I launch the software it will abort and give me long lines on why it cannot do so (unknown typestr)!
I have a connection to the BT module but it gets constantly lost from my mac book. the light in the BT controller is blinking but oce the connection is lost I do seem to be able to reconnect.
When I try to connect to the BT module I get the message that a command cannot be sent axis-1
Offline
First of all use Papywizard 2.0 and not 2.1 (that doesn't work for now on Mac OSX).
The LED on BT Controller will become solid only when Papywizard will be connected onto it 
Did you follow guidelines in updated manual ? http://www.kolor.com/buydev/media/pages … uel-fr.pdf
Offline
Hi Matthias,
are you using the internal bluetooth of your Mac? If so, I can't connect either to papywizard through my Mac alone.
I now use an external USB Bluetooth device on my Mac and have no problem.
Hope this helps,
Marco
Offline
ok thanks folks got the connection all going now need to learn the software. Are there any presets that can be downloaded from the web?
Offline
see the preset generators in following link:
http://www.papywizard.org/wiki/WikiStart#Tools
can be saved as local html file on your computer with these generators you can create the xml presets that can be loaded to papywizard.......
Georg
Last edited by gkaefer (2011-01-17 17:27:06)
Offline
mawa_73527 wrote:
ok thanks folks got the connection all going now need to learn the software. Are there any presets that can be downloaded from the web?
Papywizard offers two modes of shooting - Mosiac and Preset.
Preset is intended for shooting spherical (360x180) panos where it is desirable to reduce the number of images in rows as you approach the zenith or nadir. The preset node utilises XML format files that define an arbitrary series of shooting co-ordinates. Ask here on the forum to see whether somone has aleady made suitable preset for your camera/lens combination; alternatively you can create you own custom preset files very easily:
http://www.papywizard.org/wiki/UserGuideSvn#Presetmode
For all other, partial, panos (with less than 360x180 pano FOV) you'll probably be best off using the Mosiac mode, which shoots a regular matrix/grid of images.
You can define the matrix by setting the opposing corner co-ordinates, by setting the desired pano FOV, or by setting the number of rows and columns.
In the latter two cases the shooting positions will be computed 'around' the user-defined reference point which be in the centre of the matrix.
Offline
ok thanks some how I would like to get the shutter of my camera to release ... this did not work so far!
Last edited by mawa_73527 (2011-01-17 18:48:18)
Offline
OK I get the gear to rotate and go up and down with the the software. I define a start point and an endpoint. I get the shots calculated. I got to shoot and press start and I get the message failed.
I checked all the connections the lid is on and I got a connection but i cannot get the panogear to make any shots why?
Offline
here is what the log says:
2011-01-17 19:35:00,967::Shooting::INFO::Start shooting process... 2011-01-17 19:35:00,971::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last): File "papywizard/model/shooting.pyc", line 517, in start File "papywizard/model/data.pyc", line 266, in createHeader File "papywizard/model/data.pyc", line 179, in _serializeIOError: [Errno 2] No such file or directory: u'/Users/jeremypronk/papywizard_%(date_time)s_%(mode)s.xml' 2011-01-17 19:35:00,971::Shooting::ERROR::Shoot process failed 2011-01-17 19:35:01,904::Shooting::INFO::Start shooting process... 2011-01-17 19:35:01,908::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last): File "papywizard/model/shooting.pyc", line 517, in start File "papywizard/model/data.pyc", line 266, in createHeader File "papywizard/model/data.pyc", line 179, in _serializeIOError: [Errno 2] No such file or directory: u'/Users/jeremypronk/papywizard_%(date_time)s_%(mode)s.xml' 2011-01-17 19:35:01,908::Shooting::ERROR::Shoot process failed
Offline
here another log
2011-01-17 19:58:23,283::Shooting::INFO::Start shooting process... 2011-01-17 19:58:23,297::Shooting::INFO::Moving 2011-01-17 19:58:23,557::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:23,557::Spy::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:23,800::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:23,801::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:24,060::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:24,061::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:24,301::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:24,302::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:24,543::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:24,544::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:24,785::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:24,786::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:25,065::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:25,066::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:25,306::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:25,307::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:25,547::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:25,548::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:25,790::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:25,790::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:26,055::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:26,056::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:26,298::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:26,298::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:26,546::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:26,546::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:26,787::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:26,788::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:27,052::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:27,053::Shooting::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:27,295::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:27,296::Spy::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:27,537::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:27,538::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:27,812::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:27,812::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:28,055::Spy::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:28,057::Spy::WARNING::Axis._sendCmd(): axis 2 can't sent command. Retrying... 2011-01-17 19:58:28,297::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:28,298::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:28,540::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:28,540::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:28,805::Shooting::EXCEPTION::Axis._sendCmdTraceback (most recent call last): File "papywizard/hardware/axis.pyc", line 236, in _sendCmd File "papywizard/hardware/serialDriver.pyc", line 114, in sendCmdIOError: Timeout bei seriellem Lesevorgang 2011-01-17 19:58:28,806::Shooting::WARNING::Axis._sendCmd(): axis 1 can't sent command. Retrying... 2011-01-17 19:58:28,807::Shooting::EXCEPTION::Shooting.start()Traceback (most recent call last): File "papywizard/model/shooting.pyc", line 619, in start File "papywizard/hardware/head.pyc", line 194, in stopAxis File "papywizard/hardware/axis.pyc", line 373, in stop File "papywizard/hardware/axis.pyc", line 402, in waitStop File "papywizard/hardware/axis.pyc", line 273, in read File "papywizard/hardware/axis.pyc", line 243, in _sendCmdHardwareError: Axis 1 can't send command 2011-01-17 19:58:28,807::Shooting::ERROR::Shoot process failed
Offline
Hi Matthias,
- use an external USB Bluetooth device for a stable connection with your Mac.
- don't use "auto connect" on papywizard: it freeze the app.
I didn't upgraded the Merlin's firmwares yet and it's already quicker than using the hand controller. I'm using the GO TO version.
Regards,
Marco
Offline
external USB BT did not work.
I do not use auto connect I always connect manually.
What is the GO TO version?
Offline
mawa_73527 wrote:
external USB BT did not work.
I do not use auto connect I always connect manually.
What is the GO TO version?
I mean the Merlin GO TO Version.
Marco
Offline
What is the Merlin GO TO version?
Offline
Hi Matthias,
here you can see Merlin Standard and Merlin GO TO:
http://www.apm-telescopes.de/pro_suche. … ersteller=
Regards,
Marco
Offline
marco.lanciani wrote:
Hi Matthias,
here you can see Merlin Standard and Merlin GO TO:
http://www.apm-telescopes.de/pro_suche. … ersteller=
Regards,
Marco
sorry for going offtopic here!
Hi Marco,
currently I've a non GoTo Version with PC+Bluetooth+Papywizzard up and running.
MY handcontroller has two broken direction buttons or the cabling is broken and the plugin for the shutterrelease is very loose so cable sometimes works and sometimes it can move and it no longer releases the shutter, so finally I plan to buy a new one...
can I take the GoTo version and I've nothing to change in case of panoramas + I get an additional GoTo so I can go my first steps in astronomy...?
Liebe Gruesse,
Georg
Last edited by gkaefer (2011-01-19 13:30:43)
Offline
mawa_73527 wrote:
external USB BT did not work.
I do not use auto connect I always connect manually.
Make sure you are using Papywizard 2.0 and not 2.1.
Then, try again with the external USB-BT device and these guidance notes:
http://www.autopano.net/forum/p48089-20 … -56#p48089
We know there are users who have this working - so...
Offline
gkaefer wrote:
marco.lanciani wrote:
Hi Matthias,
here you can see Merlin Standard and Merlin GO TO:
http://www.apm-telescopes.de/pro_suche. … ersteller=
Regards,
Marcosorry for going offtopic here!
Hi Marco,
currently I've a non GoTo Version with PC+Bluetooth+Papywizzard up and running.
MY handcontroller has two broken direction buttons or the cabling is broken and the plugin for the shutterrelease is very loose so cable sometimes works and sometimes it can move and it no longer releases the shutter, so finally I plan to buy a new one...
can I take the GoTo version and I've nothing to change in case of panoramas + I get an additional GoTo so I can go my first steps in astronomy...?
Liebe Gruesse,
Georg
Hi Georg,
I think so... I took a GoTo version from APM and now it has the cable release connection.
I did also some tests with the Promote Control and everything seems to work OK. Full wireless operation through my MacBook Pro.
I did take the GoTo version to get back to astronomy... I was an astrophotographer and I'd like to restart.
Offline
Have a try on our new all in one package for Papywizard for mac here :
http://www.autopano.net/forum/t11100-pa … ac-package
Offline
Hi all,
I'm asking in name of Josef / 120to120
he installed 2.1.20 on his mac and it worked with cabling and with external BT module perfectly until today. why cant be reproduced...
following error is shown:
2011-03-02 18:44:50,711::Shooting::EXCEPTION::Shooting.start() Traceback (most recent call last): File "papywizard/model/shooting.pyc", line 528, in start File "papywizard/model/data.pyc", line 270, in createHeader File "papywizard/model/data.pyc", line 182, in _serialize IOError: [Errno 2] No such file or directory: u'/Users/macbook/Desktop/pw_da/papywizard_2011-03-02_18h44m50s_mosaic.xml' 2011-03-02 18:44:50,711::Shooting::ERROR::Unhandled exception in shoot process 2011-03-02 18:44:50,714::Main::DEBUG::ShootController.__onShootingStopped(): status=fail
what did he wrong, or what happend, how can this missing file recreated or how can the config be changed on mac so this file is no longer requested by pw?
if possible also answer bilingual german/english so communication can be optimized...
Liebe Grüße,
Georg
Offline
gkaefer wrote:
what did he wrong, or what happend, how can this missing file recreated or how can the config be changed on mac so this file is no longer requested by pw?
if possible also answer bilingual german/english so communication can be optimized...
Liebe Grüße,
Georg
Hi!
After installing the actual PW for Mac version - Alexandre´s link - it worked on my MacBopok Pro with 10.6.6 without problems.
So it guess it might be an issue with the settings - they´re sometimes somewhat funny in PW . . 
Earlier versions sometimes had problems with the Mac´s BT - but this is gone.
Nach dem Installieren der aktuellen PW für Mac Verision - siehe Alex´- Link läuft PW auf meinem MacBook Pro ohne Probleme.
Ich vermute daher ein Problem bei den Einstellungen von PW - die sind ja manchmal etwas undurchsichtig . . 
Frühere Versionen hatten schonmal Probleme mit der BT Schnittstellen des Macs. - aber das ist gelaufen.
best, Klaus
Offline
Carefully check if the '/Users/macbook/Desktop/pw_da/' exists, and is writable...
Offline
Thanka Klaus & Frederic,
Josef informed me yesterday evening he could solve his problem. He initially saved the logfile in a folder on his desktop which he did move in between. After restarting pw later... he could solve this...
Liebe Grüße,
Georg
Last edited by gkaefer (2011-03-04 12:58:25)
Offline
Good.
Offline
