360° is always deactivated (except I stitch 360° ;-))
hard links - is checked - only for this try without optimization
skip optimization is checked - only for this try

Hellkeeper wrote:

@Artisan S.: will try your Papywizard Trick now - maybe it works! ;-)

I would be extremely surprised . . . because PW moves in completely different way. It goes 1,2,3,4,5,6 and then up to 12,11,10,9,8,7, and so on - so no going back for starting again. While GP goes 1,2,3,4,5,6 then back and up to 7,8,9,10,11,12 - as http://temp.in.futureweb.at/apg/imp2.JPG shows.

But there´s a checkbox in APG´s prefs "suppose rows and colums" - maybe that helps.

best, Klaus

stabilisation delay already set to 0 ... but u r right ... it could be worse ... hehe

Papywizard Import Plugin: http://temp.in.futureweb.at/apg/papywizard1.JPG

Waiting for APG to process it ...

guess it doesn't need to know it - as it takes the sequence out of the XML file ... just a guess as I normally don't use Papywizard - but it would make sense! ;-)

Hellkeeper wrote:

Just tried to stitch another Gigapixel I shot some days after the first one with problems - results look quite similiar to the first one.
Always detected as full 360°  Speric Pano.
Also tried it with the new V3 Beta - same results as in 2.6.3! :-(

Hope some of you got some more ideas what's happening here?

Import: http://temp.in.futureweb.at/apg/2_pic0.JPG
Overview: http://temp.in.futureweb.at/apg/2_pic1.JPG
Edit Window: http://temp.in.futureweb.at/apg/2_pic2.JPG
Control Point Editor: http://temp.in.futureweb.at/apg/2_pic3.JPG
Pic Move Mode: http://temp.in.futureweb.at/apg/2_pic4.JPG

EXIF: http://temp.in.futureweb.at/apg/2_pic_exif.JPG

Thank you, bye from Austria
Andreas

Are you aware that you can upload images with your post rather than hosting them elsewhewre?

They will then be displayed with your post which makes it easier for others to view them in that context.

Last edited by mediavets (2012-08-28 18:51:04)

as for http://temp.in.futureweb.at/apg/papywizard3.JPG <-- behind pic 3899 there are some dozen other wrong pictures of the sky ... overlapping the mountains ...
is there any quick way to disable them? because clicking on every one of them and disable this picture takes VERY long (about 1 Minute / Pic - as it recalculates preview and other things after every change ...)

Last edited by Hellkeeper (2012-08-28 19:18:25)

hehe - yea - right now I deleted a whole bunch of the wrong pics ... worked well ...
Still some work to do - but I guess it should work!

Thx all!!

And I hope the Gigapan importer gets fixed soon - as with older APG Versions I never had such issues!

Hellkeeper wrote:

It really seems to be an issue with APG
I just testes the Gigapan importer / rendering with some older Gigapixel Images I rendered over the last years (all without any problems at the time I processed them)
Now with 2.6.4 I don't get a single Image to stitch without the Errors mentioned earlier in this thread. (detected as 360x180°, weird checkpoints, ...)

Someone experiences those problems too?
Already uninstalled whole APG (with all settings) and reinstalled latest Version - did not help!

Hope someone can help me on this - as we plan to take lot's of new pictures during winter Season ...

Thx
Andreas Schnederle-Wagner

Hi Andreas,

if you search the forum for gigapan you'll find issues with recent versions, overview can be seen here:
http://www.autopano.net/wiki-en/action/ … pen_Issues
and STRG+F for gigapan.
you will also notice that most of these issues are solved with 3.0 beta 2 (except one in combination with dehaze filter & gigapan)

so if your using now 3.0 beta2 and you do not use dehaze with/before the gigapan import... it looks like some more bugs are out in the wild...

Georg

Last edited by gkaefer (2012-10-30 17:18:45)

Hellkeeper wrote:

Hi Georg,

just trying out V3B2 - but the Gigapan Importer is not working for me - I simply can't click on the finish (Abschließen) Button - as it's greyd out ... so I can't test if it's working with this Version ... :-(
See here: http://temp.in.futureweb.at/apg/apg3b2_import.JPG

Andreas

curious. I just tested with up to 200 images. whichever row/column combi I tested with I never got the "finish" button to be greyed out.
Can you post screenshots of the other settings of the gigapan config tabs?

lg
Georg

ThomasV wrote:

Hellkeeper wrote:

Hi Georg,

just trying out V3B2 - but the Gigapan Importer is not working for me - I simply can't click on the finish (Abschließen) Button - as it's greyd out ... so I can't test if it's working with this Version ... :-(
See here: http://temp.in.futureweb.at/apg/apg3b2_import.JPG

Andreas

Hello,

It seems you gave 3937 files for a 41*96 grid  = 3936 pictures.
Please, check the files list.

Regards,
Thomas

Hi Thomas,

curious... I did tested this too (APG3.0b2). but I couldnt select an amount of x images where the presets than gives me a  x = (a * b) -1 result without being able to press the Finisch button. I mean selecting 23 images I allways get suggested matrix of 1 x 23 or 2 x 11, with the 2x11 !=23 I still can push the "Finish" button...

Last edited by gkaefer (2012-10-31 12:55:16)

Hi,

Thomas --> it seems it was a Hint in the right direction! I overlooked the .xml File at the bottom of the Directory!!! Will try again without the XML! ;-)
Maybe APG should warn if you try to select File Formats which are no images?

Andreas Schnederle-Wagner

Hellkeeper wrote:

alright - import worked - but it is recognized as 360° image - but it's not an 360° image ... also the "computed focal" is faaaar more (up to 1604.54mm) than the 750mm it should be (real focal length) - so the image is blown up really HUGE ... ! (I posted about this Problem with 2.4.6 in another thread some time ago

Screenshot of Editor: http://temp.in.futureweb.at/apg/apg3b2_stitch.JPG

Editor is reporting 75.8% average overlapping - can that be correct?

well - after I adjusted the picture the way I want it ... rendering won't work! :-/
http://temp.in.futureweb.at/apg/apg3b2_render.JPG