mediavets wrote:

Is removing 3 alpha 1 (and removing/re-installing 2.6.3 if necessary) not an option?

Did you register 3 Alpha 1 with the reg key for 2.6.3?

Hi Andrew!
I removed 3.0 completely and no, i didn´t register.

When i start a project APG opens, a window appeares for the fraction of a second and the vanishes without being recognizable - APG´s window keeps empty.

(All paths are correct).

best to you, Klaus

P.S.: re-bootet the Mac - didn´t help at all.

I´m going crazy a bit - have a lot of work to do, deadline is Wednesday . .

Last edited by klausesser (2012-06-24 00:10:52)

Destiny wrote:

emmm... this is painful but I am such a nice girl... TOO nice..

There are two options....

Open the 2.6.3 app as normal.. Locate the .pano file and drag into the main window area...

Hi Destiny - thanks
That was the first thing i tried.

Destiny wrote:

or...

Right mouse on the icon of the .pano file you need to open.. Choose, "Open With"...

Done...

That was among the further things i tried.

Destiny wrote:

But you are right... this should not happen... I was told by Alex that the versions are separate from each other and will not conflict.. It seem they now do...

Destiny..

Well - i never had issues having different versions on my machine . .

I´ll dig deeper into it tomorrow. Maybe it´s something wrong on my side . .

Thanks for your helping!

best, Klaus

hmmm... did try it on my PC... without issues even >1 years old .pano files and also .apw files I could open and all settings were kept ok.
Did you reboot your Mac after deinstallation of apg3.0 alpha1 and apg 2.6.3? and before installation of apg 2.6.3 again?

Georg

PS: I did register my apg 3.0 alpha 1....

Last edited by gkaefer (2012-06-24 01:18:25)

Artisan S. wrote:

And to yee all......one smart remark......NEVER, EVER, EVER, EVER (was I clear) INSTALL BETA STATE SOFTWARE ON A PRODUCTION SYSTEM (NOT EVEN IF THE POPE HIMSELF SINGNED IT OF, NEVER, EVER)......I was a professional tester and I had one dealbraker when accepting an assigment, no testhardware under MY control and authority means no Ed on the premissis.

Hey Ed!

You´re damn right, man!! Should have use another machine.

best and thanks, Klaus

klausesser wrote:

Not this time: i tell the diealogue box where the images are located and expect it to work as usual. But the dialogue box still asks for the path . . . no way to work around that, it doesn´t accept any different path.

Hi Klaus
Have you checked this "new" paths about forbidden signs ? This could cause that APG doesn't accept these paths.
What's about this "use relative path" option - on or off ?

Last edited by lumelix (2012-06-24 20:43:52)

* Autopano 2.6.3 and 3.0.0 are not sharing same settings except for one fact : .pano file association. The rest are not shared ( we have com.kolor.AutopanoGiga30.plist for v3 and com.kolor.AutopanoGiga26.plist for v2.6.* ).
* Second note : don't try to open a v3.0 project on v2.6, it probably won't work.

moved post:

Hi!

I now realized i´ll have to stitch and render my 4 2.6.3 projects again for delivering them on Wednesday. Can´t get them opened.

Doubleclick on the icon: no reaction besides the app openes.
Drag and drop the project-icon to the app-icon in the dock (as usual): no reaction besides the app openes.
Drag and drop the project-icon into the app window: no reaction besides the app openes.
Use the "open" dialogue ion the app: no reaction.
Use the usual system-mechanisms to open projects: no reaction.

The only reaction is: a window *seems* to flash in for the fraction of a second. Unrecognizable.

Let me tell you: that´s not funny, not at all . . .

best, Klaus

Tried to paste the project´s code here - doesn´t work:

"The following errors need to be corrected before the message can be posted:"

No information followed.

Put it on my webspace instead:
http://www.360impressions.de/APG_Project.zip

Last edited by klausesser (2012-06-25 14:01:24)

Klaus,

I downloaded you zip...
the .pano file opened... and saw its labeled as

<ApplicationName> Autopano Giga 2.6.2 RC 4 </ApplicationName>

I did try openening it with my 2.6.3 final and got the same result, just a small window popping up and nothing happens and no chance to see what this window is telling me...

Liebe Gruesse,
Georg

mediavets wrote:

klausesser wrote:

AlexandreJ wrote:

* Autopano 2.6.3 and 3.0.0 are not sharing same settings except for one fact : .pano file association. The rest are not shared ( we have com.kolor.AutopanoGiga30.plist for v3 and com.kolor.AutopanoGiga26.plist for v2.6.* ).
* Second note : don't try to open a v3.0 project on v2.6, it probably won't work.

I´m afraid you misunderstood: i tried to open a 2.6.2 project in 2.6.3 !

Usually that works fine. After having installed the Alpha-Demo it doesn´t work any more. I deleted all 3.0 files i can recognize from the machine. Doesn´t help.

You can find 2.6.2 here - perhaps revert to that version temporarily?

http://download.kolor.com/apg/stable/history

Hi Andrew!

I did my recent projects with 2.6.2 and 2.6.3 - i don´t want to go back to 2.6.2 because 2.6.3 works very well. I can´t see any reason why 2.6.3 shouldn´t take a 2.6.2 project because it did without any issue before i installed 3.0.

best, Klaus

Maybe it´s an issue on my side - but i can´t find it at all . . .

Last edited by klausesser (2012-06-25 14:25:47)

gkaefer wrote:

Klaus,

I downloaded you zip...
the .pano file opened... and saw its labeled as

Code:

<ApplicationName> Autopano Giga 2.6.2 RC 4 </ApplicationName>

I did try openening it with my 2.6.3 final and got the same result, just a small window popping up and nothing happens and no chance to see what this window is telling me...

Liebe Gruesse,
Georg

Hi Georg!

Right! And it never happened before when i opened a project i made just four weeks ago . .

best, Klaus

gkaefer wrote:

I GOT IT....


open your .pano file:

Code:

<FinalRender>
    <RenderBasenameTpl> %a2 </RenderBasenameTpl>
    <RenderPath> /Volumes/Speedy/21_03_12/H&M_TIFF/1 </RenderPath>

change it to (delete the & from your path !!!!) and change the path on your volume....:

Code:

<FinalRender>
    <RenderBasenameTpl> %a2 </RenderBasenameTpl>
    <RenderPath> /Volumes/Speedy/21_03_12/HM_TIFF/1 </RenderPath>

with the & in the path and openening with 3.0 alpha 1 nothing happens.
without the & .... I get message that the path of the source images cant be found...

funny thin is that not the "/Volumes/Speedy/21_03_12/H&M_TIFF/1" is not found,
but now for my test it says "C:/Users/gkaefer/Downloads/Klaus/APG_Project/_MG_8154.tif" etc. is missing

Georg

Hi Georg!

I didn´t try to open it in 3.0 - i opened it before the 3.0 install in 2.6.3 several times and it worked fine.

i´ll try your suggestion! Thanks!

best, KLaus

I´m running out of time now - i started to stich them all again.

thanks for your helping, Klaus