You may also be interested in the following product(s)
As low as: €311.00
As low as: €393.00
As low as: €261.00
As low as: €376.20
Rotator D3L (RD3L) is a state of the art design from Fanotec - a compact precision rotator with EZ-Leveler-II built in.
Users can now adjust very fine leveling with loading of heavy gear on top. Unlike leveling using ball head or tripod legs, leveling remains stationary after each adjustment. No more
need to compensate for the effect of loading. Maximum angle of adjustment is 5 degrees. Cases sold separately (uses same case as the EZ-Leveler-II)
3 selectable detent interval options 6-8-30 stops around (60, 45, and 12 degrees)
Detent interval can be changed in less than 3 seconds By a simple flip of detent switches, detent interval setting can be changed from one to another on the fly
Head Alignment Knob to point pano head in any direction.
Compact and light weight. This is probably the most compact and light weight rotator with leveling base built-in-- a mere 350g and a minimum height of 49.5mm.
Demarcations (tic marks) on rotator include:
* 5, 10 degree small tic marks
* 20 degree large tic marks
* 30 degree numerations (0, 30,60,90 etc)
3 selectable degree stop increments (with equivalent number of stops around) include:
* 12 (30 stops)
* 45 (8 stops)
* 60 (6 stops)
note: heavier weight loads (3+lbs/1.5kgs) may see a slight lifting of level on opposite side of load which may effect leveling. Not recommended for use with heavier loading on nadir
Material = Anodized aluminum
Base Color = Non-glare black
Mounting threads = 3/8 inch
Maximum angle of adjustment = 5 degrees.
Weight = 350g
Load Limit = 3.5kg
Rotator diameter = 73mm
Leveler max diameter = 93mm
Height = 49.5mm